EchoCar
victorhugosampaio·EchoCar·pcb/EchoCar_PCB.kicad_pcb
About the EchoCar PCB
EchoCar is an open source STM32 PCB design by victorhugosampaio, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 40.5 × 48.5 mm, with 26 components from 18 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3 and MX1616H. By type, the board carries 13 capacitors, 3 ICs, 3 connectors, 3 resistors, 2 diodes and 1 crystal.
It belongs with the robotics & motion designs in this gallery.
From the project
DIY robot car controlled by voice using TinyML.
Hi there, my name is Victor. I'm a ~~undergraduate~~ graduated computer engineer, currently working as a firmware trainee engineer. The EchoCar is my final paper project for college.
I used two microcontrollers: a Bluepill (STM32F103C8T6) to control the hardware itself and an Arduino Nano 33 BLE Sense to run the MFCC algorithm and the AI model. I chose to use Zephyr as the RTOS to operate the system. To create and train the AI model and deploy it to the Arduino Nano microcontroller, I used Edge Impulse. I also used it to edit some audio data to fit within the 1-second window for training the…
Main components on the EchoCar
EchoCar bill of materials (BOM)
26 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | MX1616H | MX1616H | U3 |
| 1 | 16MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | SW | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Display_Con | PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | Arduino_con | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | SW_SPDT | SW_E-Switch_EG1224_SPDT_Angled | SW1 |
| 1 | PWR_ON | LED_0603_1608Metric | D1 |
| 1 | BZV55B5V1 | D_MiniMELF | D2 |
| 1 | 10U 10u | C_0805_2012Metric | C1 |
| 6 | 100N 100n | C_0402_1005Metric | C2, C3, C4, C5, C6, C7 |
| 2 | 10P 10p | C_0402_1005Metric | C8, C9 |
| 2 | 22U 22u | C_0805_2012Metric | C10, C11 |
| 2 | 47u 16V | CP_Elec_5x5.3 | C12, C13 |
| 1 | 10K 10k | R_0402_1005Metric | R1 |
| 1 | 1k | R_0402_1005Metric | R2 |
| 1 | 220 | R_0402_1005Metric | R3 |
EchoCar design files
The KiCad project lives in the victorhugosampaio/EchoCar repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/EchoCar_PCB.kicad_pcb
- Schematicpcb/EchoCar_PCB.kicad_sch
- BOMpcb/EchoCar_BOM.csv
EchoCar: common questions
What microcontroller does the EchoCar use?
The EchoCar is built around the STM32F103C8T6, from the STM32 family.
How big is the EchoCar PCB?
The EchoCar measures 40.5 × 48.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the EchoCar?
26 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EchoCar design files?
From the victorhugosampaio/EchoCar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EchoCar design in my own project?
Yes, under the terms of its BSD-3-Clause license, which victorhugosampaio chose for the repository.
Can I test firmware for the EchoCar without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k