Me3230-robot
vim449·me3230-robot·schematic/robot.kicad_sch
About the Me3230-robot PCB
Me3230-robot is an open source AVR/Arduino PCB design by vim449, published on GitHub. It is a board, with 47 components from 28 distinct parts.
Its main chip is the ARDUINO_MEGA_R3, from the AVR/Arduino family. Other key parts include the SINGLETB9051FTG_MOTOR_DRIVER, ENCODER, BUCKCONVERTER, SHARPDISTANCE and TCS3200. By type, the board carries 13 ICs, 8 modules, 7 resistors, 5 connectors, 4 switches and 2 capacitors.
It belongs with the robotics & motion designs in this gallery.
From the project
Project files for Mechatronics Project Robot
Main components on the Me3230-robot
Me3230-robot bill of materials (BOM)
47 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | SINGLETB9051FTG_MOTOR_DRIVER | SINGLETB9051FTG | U1, U2, U3 |
| 3 | ENCODER | ENCODER | U4, U5, U6 |
| 1 | BUCKCONVERTER | BuckConverter | U7 |
| 2 | SHARPDISTANCE | SHARPDISTANCE | U8, U11 |
| 1 | TCS3200 | U9 | |
| 1 | HALL-EFFECT | HALLEFFECT | U10 |
| 1 | MEEN3230_POWER_BOARD | U12 | |
| 1 | MCP6004 | U13 | |
| 5 | MOTOR | VIBE-MOTOR-10MM | M1, M2, M3, M4, M5 |
| 3 | SERVO | SERVOFOOTPRINT | M6, M7, M8 |
| 3 | Conn_02x06_Row_Letter_Last | J1, J2, J3 | |
| 1 | Screw_Terminal_01x02 | J4 | |
| 1 | Conn_02x18_Row_Letter_Last | J5 | |
| 1 | ARDUINO_MEGA_R3 | ARDUINO_MEGA_NO_SILK | B1 |
| 1 | BATTERY | Power Terminal | BT1 |
| 2 | D | Di1, Di2 | |
| 1 | FUSE | Fuse Holder | F1 |
| 1 | POT | TRIM_POT | RV1 |
| 3 | SWITCH | Header3 | S1, S2, S3 |
| 1 | SWITCH-SPDT | SWITCH_SPDT_SMD | S4 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XBEE_DONGLE | W1 | |
| 1 | L298N | L298 | D4 |
| 2 | 100nF | CAPACITOR | C1, C2 |
| 1 | QTR-MD-8RC | QTRMD8 | R1 |
| 2 | QTR-MD-1RC | QTRMD1 | R2, R3 |
| 2 | — | RESISTORFOOTPRINT | R4, R5 |
| 1 | 47k | RESISTORFOOTPRINT | R6 |
| 1 | 2k | RESISTORFOOTPRINT | R7 |
Me3230-robot design files
The KiCad project lives in the vim449/me3230-robot repository on GitHub; these links point at the commit this page was built from.
- Schematicschematic/robot.kicad_sch
Me3230-robot: common questions
What microcontroller does the Me3230-robot use?
The Me3230-robot is built around the ARDUINO_MEGA_R3, from the AVR/Arduino family.
How many components are on the Me3230-robot?
47 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Me3230-robot design files?
From the vim449/me3230-robot repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Me3230-robot design in my own project?
The repository has no license, so all rights stay with vim449. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Me3230-robot without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k