555-Timer-LED-Blinker
vishalbodkhe·555-Timer-LED-Blinker-PCB
About the 555-Timer-LED-Blinker PCB
555-Timer-LED-Blinker is an open source PCB design by vishalbodkhe, published on GitHub. It is a 2-layer board measuring 42 × 18 mm, with 8 components from 8 distinct parts.
Other key parts include the NE555D. By type, the board carries 3 resistors, 2 capacitors, 1 IC, 1 connector and 1 diode.
From the project
555 Timer LED Blinker PCB designed using KiCad
A 555 Timer based LED Blinker PCB designed using KiCad.
This project is a simple LED blinker circuit using the NE555 timer IC in astable mode.
The complete PCB design workflow was performed using KiCad, including:
- Circuit schematic design - Footprint assignment - PCB component placement - PCB routing - Design Rule Check (DRC) - 3D PCB verification - Gerber file generation - Drill file generation

Main components on the 555-Timer-LED-Blinker
555-Timer-LED-Blinker bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555D | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Screw_Terminal_01x02 | Altech_AK100_1x02_P5.00mm | J1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 10uF | C_0805_2012Metric | C1 |
| 1 | 100nF | C_0805_2012Metric | C2 |
| 1 | 1k | R_0805_2012Metric | R1 |
| 1 | 10k | R_0805_2012Metric | R2 |
| 1 | 330 | R_0805_2012Metric | R3 |
555-Timer-LED-Blinker design files
The KiCad project lives in the vishalbodkhe/555-Timer-LED-Blinker-PCB repository on GitHub; these links point at the commit this page was built from.
- Layoutp2.kicad_pcb
- Schematicp2.kicad_sch
555-Timer-LED-Blinker: common questions
How big is the 555-Timer-LED-Blinker PCB?
The 555-Timer-LED-Blinker measures 42 × 18 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 555-Timer-LED-Blinker?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the 555-Timer-LED-Blinker design files?
From the vishalbodkhe/555-Timer-LED-Blinker-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 555-Timer-LED-Blinker design in my own project?
The repository has no license, so all rights stay with vishalbodkhe. Use it as a reference, and ask the author before reusing the design.