Alpaca drive
vitaliy-bobrov·alpaca-drive
About the Alpaca drive PCB
Alpaca drive is an open source PCB design by vitaliy-bobrov, published on GitHub. It is a 2-layer board measuring 50.2 × 61 mm, with 35 components from 30 distinct parts.
Other key parts include the 4049. By type, the board carries 8 capacitors, 7 resistors, 2 switches, 2 diodes and 1 IC.
From the project
Alpaca Drive KiCad source files - similar to Red Llama with tone control
Alpaca Drive similar to Red Llama with tone control, basically overdrive / fuzz based on CD4049UBE.
The repository contains KiCad source files: schematic, PCB, BOM.

Main components on the Alpaca drive
Alpaca drive bill of materials (BOM)
35 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4049 | DIP16 | U1 |
| 1 | 9V | PAD1 | H1 |
| 1 | IN | PAD1 | H2 |
| 3 | GND | PAD1 | H3, H5, H12 |
| 2 | LED | PAD1 | H4, H11 |
| 1 | OUT | PAD1 | H6 |
| 1 | BI | PAD1 | H7 |
| 1 | JO | PAD1 | H8 |
| 1 | BO | PAD1 | H9 |
| 1 | JI | PAD1 | H10 |
| 1 | GAIN B1M | 16MM_B.MOUNT | RV1 |
| 1 | TONE B10K | 16MM_B.MOUNT | RV2 |
| 1 | LEVEL A10K | 16MM_B.MOUNT | RV3 |
| 1 | SWITCH-3PDT | 3PDT.LUGS.SPF | S1 |
| 1 | TONE BYPASS | SPDT.LUGS | SW1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 1N4007 | DO41-3 | D2 |
| 1 | 68nF | 0.2_22.SML | C1 |
| 1 | 100uF | CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 100nF | 0.2_22.SML | C3 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 51pF | 0.2%22.SML | C4 |
| 1 | 33nF | 0.2_22.SML | C5 |
| 1 | 100pF | 0.2%22.SML | C6 |
| 1 | 10uF | CP_Radial_D6.3mm_P2.50mm | C7 |
| 1 | 20n | 0.2_22.SML | C8 |
| 1 | 4k7 | 0.3_22.B | R1 |
| 2 | 1M | 0.3_22.B | R2, R6 |
| 1 | 1k | 0.3_22.B | R3 |
| 2 | 100k | 0.3_22.B | R4, R5 |
| 1 | 820R | 0.3_22.B | R7 |
Alpaca drive design files
The KiCad project lives in the vitaliy-bobrov/alpaca-drive repository on GitHub; these links point at the commit this page was built from.
- Layoutalpaca-drive.kicad_pcb
Alpaca drive: common questions
How big is the Alpaca drive PCB?
The Alpaca drive measures 50.2 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Alpaca drive?
35 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Alpaca drive design files?
From the vitaliy-bobrov/alpaca-drive repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Alpaca drive design in my own project?
The repository has no license, so all rights stay with vitaliy-bobrov. Use it as a reference, and ask the author before reusing the design.