15 open source boards using the 4049
Real designs built with the 4049, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Odyssey 2 rgb
abzman
83.3 × 78.2 mm70 parts2LUnlicense191802-Mini-Super-Elf-Bus
dmadole
100 × 100 mm54 parts2LNo license21802-Mini-Compact-Flash
dmadole
100 × 100 mm36 parts2LNo license2PWM-H-Bridge
NealEhardt
70 × 71 mm35 parts2LNo license2EPROM-Programmer
codesqueak
140 × 100 mm66 parts2LCERN-OHL-S-2.011802-Mini-Processor
dmadole
100 × 100 mm64 parts2LNo license11802-Mini-1854-Serial
dmadole
100 × 100 mm44 parts2LNo license11802-Mini-Backplane
dmadole
100 × 100 mm36 parts2LGPL-3.01Modular sound synthesizer
zetapersei
163.1 × 114 mm97 parts2LGPL-3.00Enhanced-EPROM-Programmer
codesqueak
145 × 130 mm74 parts2LCERN-OHL-S-2.00AC30
linuxha
173 × 97.5 mm65 parts2LNo license01802-Mini-Expander-RTC
dmadole
100 × 100 mm65 parts2LNo license0Alpaca drive
vitaliy-bobrov
50.2 × 61 mm35 parts2LNo license0TDP3 T7 H-Bridge V-1
saadmaziz
83.5 × 85 mm39 parts2LMIT0CX85 AtariXE
gianlucarenzi
165 × 115.4 mm26 parts2LGPL-3.014
How designs wire the 4049
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the 4049 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 13 is left unconnected on 14 of 14 designs.
- Pin 16 is left unconnected on 14 of 14 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1 | Connected to: VCC 64% · a signal 29% | — |
| VSSpin 8 | Connected to: GND 100% | — |
| Pin 13 | Connected to: Not connected 100% | — |
| Pin 16 | Connected to: Not connected 100% | — |
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Odyssey 2 rgb by abzman, CX85 AtariXE by gianlucarenzi, 1802-Mini-Compact-Flash by dmadole and 1802-Mini-Super-Elf-Bus by dmadole.
The 4049 in open source designs
The gallery holds 15 open source boards using the 4049 from 15 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 54 components.
100% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is Odyssey 2 rgb by abzman.
What boards using the 4049 are built for
4049: common questions
Where can I find a 4049 reference design?
Each of the 15 boards on this page is a real design using the 4049. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 4049 pin 13 connected?
Pin 13 is left unconnected on 14 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the 4049.
How is the 4049 pin 16 connected?
Pin 16 is left unconnected on 14 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the 4049.
What parts are used alongside the 4049?
The 4001, 4023, 4071, 4013 and 4011 appear in the most repositories here.
How big is a typical board using the 4049?
The median is 100 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the 4049?
By GitHub stars, Odyssey 2 rgb by abzman, with 19 stars.
Can I simulate one of these boards using the 4049 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.