Ardu can
vk-sahni·ardu-can
About the Ardu can PCB
Ardu can is an open source STM32 PCB design by vk-sahni, published on GitHub. It is a 6-layer board measuring 37 × 37 mm, with 79 components from 34 distinct parts.
Its main chip is the STM32F412CGUx, from the STM32 family. Other key parts include the LM66100DCK, ICM-42688-P, TJA1051TK-3 and NCV8705MT33TCG. By type, the board carries 22 capacitors, 13 resistors, 7 connectors, 5 ICs, 4 diodes and 3 fuses.
From the project
CAN-NODE
Ardu-CAN is a compact embedded-controller PCB design portfolio built in KiCad. It brings together an STM32F412 MCU, CAN-bus interface circuitry, an inertial sensor, power-protection and regulation circuits, and a custom board layout.
Explore the editable KiCad design, project libraries, engineering exports, and 3D assembly model below. The repository also documents the current design review and next steps toward a fabrication release.

Main components on the Ardu can
Ardu can bill of materials (BOM)
79 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM66100DCK | SOT-363_SC-70-6 | U1 |
| 1 | ICM-42688-P | PQFN50P300X250X97-14N | U4 |
| 1 | TJA1051TK-3 | VSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm | U5 |
| 1 | NCV8705MT33TCG | WDFN6_2X2_ONS | U6 |
| 1 | STM32F412CGUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U8 |
| 1 | NMOS | SOT-23_DIO | Q1 |
| 1 | LFSPXO072801REEL | LFSPXO072801REEL_IQD | X1 |
| 2 | CAN | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J1, J2 |
| 1 | M07B-GHS-TB(LF)(SN) | JST_GH_SM07B-GHS-TB_1x07-1MP_P1.25mm_Horizontal | J3 |
| 1 | SM06B-GHS-TB(LF)(SN) | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J4 |
| 1 | SM04B-GHS-TB(LF)(SN) | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J5 |
| 1 | SM10B-GHS-TB(LF)(SN) | JST_GH_SM10B-GHS-TB_1x10-1MP_P1.25mm_Horizontal | J6 |
| 1 | SM06B-SRSS-TB(LF)(SN) | JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J7 |
| 22 | ESD9C3.3ST5G | CR_ESD9C3.3ST5G_ONS | CR1, CR2, CR3, CR4, CR5, CR6, CR7, CR8 +14 |
| 3 | 500mA | Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F1, F2, F3 |
| 1 | NUP2105L | SOT-23 | D1 |
| 3 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D4 |
| 1 | 22uH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L3 |
| 8 | 0.1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C8, C9, C10, C11, C16, C23, C26 |
| 2 | 1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C15 |
| 3 | 2.2uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C17, C22 |
| 4 | 10uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C19, C20, C21 |
| 1 | 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24 |
| 1 | 4.7uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25 |
| 1 | 100pf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C27 |
| 4 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R7 |
| 1 | 120E | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 5.1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 2 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 1 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 2 | 604 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12 |
| 1 | 1.5k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
Ardu can design files
The KiCad project lives in the vk-sahni/ardu-can repository on GitHub; these links point at the commit this page was built from.
- Layoutardu-can.kicad_pcb
- Schematicardu-can.kicad_sch
- BOMdocs/ardu-can-bom.csv
Ardu can: common questions
What microcontroller does the Ardu can use?
The Ardu can is built around the STM32F412CGUx, from the STM32 family.
How big is the Ardu can PCB?
The Ardu can measures 37 × 37 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Ardu can?
79 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ardu can design files?
From the vk-sahni/ardu-can repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ardu can design in my own project?
The repository has no license, so all rights stay with vk-sahni. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ardu can without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k