157 open source boards using the ICM-42688-P
Real designs built with the ICM-42688-P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FourThirdsEye
will127534
47 × 47 mm106 parts4LMIT384OneInchEye
will127534
39 × 39 mm79 parts4LMIT355STM32
StarlightEye
will127534
39 × 39 mm111 parts4LMIT328STM32
Ovc
osrf
230 × 56 mm379 parts6LApache-2.0207STM32
LEVIA-H7
piecol
39.5 × 39.5 mm133 parts6LCERN-OHL-S-2.068STM32
STM32F7 FC
rishikesh2715
38.5 × 38.5 mm127 parts8LMIT56STM32
NewSkyH7-Air
kuku-199
36 × 36 mm157 parts6LApache-2.010ESP8266
Pcb
PinkFluffyUnic0rn
43 × 40.1 mm65 parts4LGPL-3.010STM32
Glove daq
corneliusgruss
46 × 56 mm63 parts2LMIT7STM32
Cobalt f405
msaribekyan
38.5 × 38.5 mm68 parts2LGPL-3.06STM32
Hardware
leelili444
45 × 40 mm56 parts4LNo license5Icm-42688-breakout
anyshake
35 × 25 mm20 parts2LNo license5STM32
Dreamscape-F722
sneakylizard123-4
40 × 40 mm104 parts4LNo license4RP2040/RP2350
RP2040-Motion-Sense-Board
rishikesh2715
36.8 × 52.1 mm73 parts4LMIT4STM32
Goatfc bones
Torie3
30 × 26 mm54 parts4LCC-BY-NC-4.04STM32
Zirconia
viola0222
39 × 91 mm90 parts2LApache-2.03ESP32
Esp32-drone fcu
burakbasdere
36 × 36 mm66 parts4LNo license3STM32
PowerRegulator
Nahaa0711
114.8 × 115 mm62 parts2LNo license3STM32
Fpv drone
AQUA-Warrior
37 × 37 mm106 parts4LCC-BY-SA-4.02STM32
Mini-Air
darshg321
41 × 42 mm84 parts2LCERN-OHL-W-2.02STM32
KHATAF-F411
xXsenseiXx
51.9 × 52.8 mm67 parts4LNo license2STM32
Bench robotics controller 5eab0a5d
mrcha033
160 × 100 mm42 parts4LApache-2.02RP2040/RP2350
StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1STM32
GMWM Analysis Board
thejamesrhodes
68.8 × 68.6 mm152 parts4LMIT1STM32
IRIS
codinga593
80 × 80 mm129 parts6LNo license1RP2040/RP2350
DeltaRho
valleyquail
68 × 75 mm114 parts4LNo license1STM32
STM32-FC
NARAE-INHA-UNIV
50 × 70 mm106 parts4LNo license1STM32
Atmos fc
cypamigon
40 × 40 mm101 parts4LMIT1STM32
MCU Board 0.2
thejamesrhodes
50 × 50 mm96 parts4LApache-2.01STM32
Drone
ifahmy
25.6 × 29.5 mm86 parts4LNo license1STM32
Calibration board
htl-stp-ecer
54.9 × 55 mm74 parts2LNo license1RP2040/RP2350
RP2040 Motion Logger
rishikesh2715
22.9 × 63 mm69 parts4LMIT1ESP32
Osmo pocket esp32-gimbal
SREESAIARJUN
26 × 85 mm53 parts4LNo license1STM32
Hummingbird
knosmos
53 × 20 mm43 parts4LNo license1ESP32
Esp32s3-usb imu board
kanishqtanwar35-hub
65 × 45 mm33 parts2LNo license1STM32
Stm32n6-px4
DataFlux-Robot
55 × 28 mm21 parts6LApache-2.01
How designs wire the ICM-42688-P
Read from the KiCad layouts of 110 open source designs, one per repository: what each pin of the ICM-42688-P connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 97 of 110 designs, most often 100 nF (then 10 nF).
- The VDD pin has a decoupling capacitor on 96 of 107 designs, most often 100 nF (then 2.2 µF).
- The RESV_7 pin is tied to GND on 84 of 107 designs (not connected on 21).
- The RESV_2 pin is left unconnected on 66 of 110 designs (GND on 40, a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RESV_2pin 2 | Connected to: Not connected 60% · GND 36% | — |
| VDDIOpin 5 | Connected to: 3.3V 85% |
|
| GNDpin 6 | Connected to: GND 95% | — |
| RESV_7pin 7 | Connected to: GND 79% · not connected 20% | — |
| VDDpin 8 | Connected to: 3.3V 85% |
|
| RESV_10pin 10 | Connected to: Not connected 61% · GND 36% | — |
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FourThirdsEye by will127534, OneInchEye by will127534, StarlightEye by will127534 and Ovc by osrf.
The ICM-42688-P in open source designs
The gallery holds 157 open source boards using the ICM-42688-P from 122 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 88 components.
77% use four copper layers or more, and 43% carry an open source license.
The most starred is FourThirdsEye by will127534.
Parts used alongside the ICM-42688-P
Microcontrollers on boards using the ICM-42688-P
What boards using the ICM-42688-P are built for
ICM-42688-P: common questions
Where can I find a ICM-42688-P reference design?
Each of the 157 boards on this page is a real design using the ICM-42688-P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ICM-42688-P VDDIO pin?
The VDDIO pin has a decoupling capacitor on 97 of 110 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 110 open source designs using the ICM-42688-P.
What decoupling capacitors do designs use on the ICM-42688-P VDD pin?
The VDD pin has a decoupling capacitor on 96 of 107 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 110 open source designs using the ICM-42688-P.
How is the ICM-42688-P RESV_7 pin connected?
The RESV_7 pin is tied to GND on 84 of 107 designs (not connected on 21). Counted from the KiCad layouts of 110 open source designs using the ICM-42688-P.
What parts are used alongside the ICM-42688-P?
The USBLC6-2SC6, AT7456E, BMP388, W25Q128JVSIQ and AP2112K-3.3 appear in the most repositories here.
Which microcontrollers do boards using the ICM-42688-P use?
Most are built on STM32 (89), ESP32 (27), RP2040/RP2350 (11) and Raspberry Pi (2).
How big is a typical board using the ICM-42688-P?
The median is 50 × 50 mm, and 23% are two-layer designs.
What is the most popular open source board using the ICM-42688-P?
By GitHub stars, FourThirdsEye by will127534, with 384 stars.
Can I simulate one of these boards using the ICM-42688-P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.