DSAN
vlad-mod·DSAN·MESH-pcb/MESH.kicad_pcb
About the DSAN PCB
DSAN is an open source STM32 PCB design by vlad-mod, published on GitHub. It is a 2-layer board measuring 56.5 × 28.2 mm, with 69 components from 32 distinct parts.
Its main chip is the STM32L053R8TX, from the STM32 family. Other key parts include the TP4056, CC1101RTK, AP2127K-3.3 and AP2127R-3.3. By type, the board carries 21 capacitors, 17 resistors, 11 connectors, 5 ICs, 4 diodes and 4 inductors.
It belongs with the sensors designs in this gallery.
From the project
Distributed Sensor Actuator Network

Main components on the DSAN
DSAN bill of materials (BOM)
69 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | SOP127P600X175-9N | U1 |
| 1 | CC1101RTK | QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 1 | AP2127K-3.3 | SOT-23-5 | U3 |
| 1 | AP2127R-3.3 AP2127K-3.3 | SOT-23-5 | U4 |
| 1 | STM32L053R8TX STM32L053R8Tx | LQFP-64_10x10mm_P0.5mm | U5 |
| 2 | NMOS | SOIC127P600X175-8N | Q1, Q3 |
| 1 | AO3401A | SOT-23 | Q2 |
| 2 | XTM32027000QT00351001 | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1, Y2 |
| 1 | Ant. | PinHeader_1x01_P1.00mm_Vertical | J1 |
| 4 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Bare | J2, J3, J4, J5 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P1.00mm_Vertical | J6 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.00mm_Vertical | J9 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_Palconn_UTC16-G | J10 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Bare | J11 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Bare | J12 |
| 2 | SW_Push | SW_5.6_3.1 | SW1, SW2 |
| 4 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4 |
| 3 | 27NH 27nH | L_0402_1005Metric | L121, L123, L131 |
| 1 | 22NH 22nH | L_0402_1005Metric | L122 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 10NF 10nF | C_0402_1005Metric | C1, C4, C5, C6, C9, C10, C11, C12 +1 |
| 4 | 32PF 32pF | C_0402_1005Metric | C2, C3, C7, C8 |
| 2 | 0.1UF 0.1uf | C_0402_1005Metric | C13, C14 |
| 2 | 3.9PF 3.9pF | C_0402_1005Metric | C121, C131 |
| 1 | 8.2PF 8.2pF | C_0402_1005Metric | C122 |
| 1 | 5.6PF 5.6pF | C_0402_1005Metric | C123 |
| 2 | 220PF 220pF | C_0402_1005Metric | C124, C125 |
| 2 | 56K 56k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R10 |
| 7 | 220 | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R2, R4, R5, R11, R12, R14, R16 |
| 3 | 10k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R3, R6, R7 |
| 2 | 5.1k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R8, R9 |
| 3 | 1k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R13, R15, R17 |
DSAN design files
The KiCad project lives in the vlad-mod/DSAN repository on GitHub; these links point at the commit this page was built from.
- LayoutMESH-pcb/MESH.kicad_pcb
- SchematicMESH-pcb/MESH.kicad_sch
- BOMMESH-pcb/MESH_BOM.csv
DSAN: common questions
What microcontroller does the DSAN use?
The DSAN is built around the STM32L053R8TX, from the STM32 family.
How big is the DSAN PCB?
The DSAN measures 56.5 × 28.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DSAN?
69 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DSAN design files?
From the vlad-mod/DSAN repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DSAN design in my own project?
The repository has no license, so all rights stay with vlad-mod. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DSAN without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k