HardLabs

Power Analyzer with an ACS71020 and a Teensy 4.0

Vrail99·PowerAnalyzer·PCB-files/MainPCB/PowerAnalyzer_ACS71020_V2.kicad_pcb

Power Analyzer with an ACS71020 and a Teensy 4.0 PCB layout, top view — open source NXP board by Vrail99

About the Power Analyzer with an ACS71020 and a Teensy 4.0 PCB

Power Analyzer with an ACS71020 and a Teensy 4.0 is an open source NXP PCB design by Vrail99, published on GitHub. It is a 2-layer board measuring 58.5 × 67.9 mm, with 31 components from 24 distinct parts.

Its main chip is the Teensy4.0, from the NXP family. Other key parts include the UCC12040, ACS71020 and Si8641. By type, the board carries 9 capacitors, 6 resistors, 5 connectors, 4 ICs, 2 diodes and 1 fuse.

From the project

Project for the Power Analyzer based on a COTS Power Monitoring IC

https://hackaday.io/project/180663-power-analyzer-based-on-a-cots-power-monitoring-ic

Please visit this page for further information.

Main components on the Power Analyzer with an ACS71020 and a Teensy 4.0

UCC12040ACS71020Teensy4.0Si8641

Power Analyzer with an ACS71020 and a Teensy 4.0 bill of materials (BOM)

31 components, 24 distinct parts.

QtyPartRefs
1
UCC12040
U1
1
ACS71020
U2
1
Teensy4.0
U3
1
Si8641
U4
1
L_VinN_out
J1
1
L_VinL_out
J2
1
L_VinN_in
J3
1
H_VinL_in
J4
1
Lid-Connector FFC
J9
1
Fuse
F1
1
PBO-1-S5
PS1
1
3k
RS1
1
MOV
RV1
2
Vf <= 0.3V
D1, D2
1
2.2uH
L1
2
0.1u
C1, C2
2
10u
C3, C4
1
4.7u
C5
1
100u
C6
1
68u
C7
Show 4 more
QtyPartRefs
2
1u
C9, C10
4
1meg
R1, R2, R3, R4
1
1meg
R5
1
10k
R6

Power Analyzer with an ACS71020 and a Teensy 4.0 design files

The KiCad project lives in the Vrail99/PowerAnalyzer repository on GitHub; these links point at the commit this page was built from.

Power Analyzer with an ACS71020 and a Teensy 4.0: common questions

What microcontroller does the Power Analyzer with an ACS71020 and a Teensy 4.0 use?

The Power Analyzer with an ACS71020 and a Teensy 4.0 is built around the Teensy4.0, from the NXP family.

How big is the Power Analyzer with an ACS71020 and a Teensy 4.0 PCB?

The Power Analyzer with an ACS71020 and a Teensy 4.0 measures 58.5 × 67.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Power Analyzer with an ACS71020 and a Teensy 4.0?

31 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Power Analyzer with an ACS71020 and a Teensy 4.0 design files?

From the Vrail99/PowerAnalyzer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Power Analyzer with an ACS71020 and a Teensy 4.0 design in my own project?

The repository has no license, so all rights stay with Vrail99. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Power Analyzer with an ACS71020 and a Teensy 4.0 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in PowerAnalyzer

Similar boards