Surface-Level-Vehicle
VSSUT-Robotics-Society·Surface-Level-Vehicle·PCB/SLV v1.0.kicad_pcb
About the Surface-Level-Vehicle PCB
Surface-Level-Vehicle is an open source AVR/Arduino PCB design by VSSUT-Robotics-Society, published on GitHub. It is a 2-layer board measuring 38.5 × 60 mm, with 8 components from 8 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 7 connectors and 1 module.
It belongs with the robotics & motion, rf & radio and sensors designs in this gallery.
From the project
The Surface Level Vehicle (SLV) is an unmanned watercraft designed for surface operations. It features a lightweight aluminum extrusion frame for stability and modularity, is propelled by four BLDC motors, guided by GPS for autonomous navigation, and uses air-filled PVC pipes for buoyancy and balance.
An autonomous surface water robot designed for environmental monitoring, research, and rescue operations.
The Surface Level Vehicle (SLV) is an unmanned watercraft designed for surface-level operations. It incorporates a lightweight, durable aluminum extrusion frame for structural support, enhancing stability, modularity, and ease of assembly. Powered by four BLDC motors and equipped with GPS for autonomous navigation, the SLV is built for efficient and precise aquatic missions.
Main components on the Surface-Level-Vehicle
Surface-Level-Vehicle bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 1 | GPS and Compass | TerminalBlock_bornier-6_P5.08mm | J1 |
| 1 | SD Card Reader | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | ESC left | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | ESC right | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | VCC Line | PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | GND Line | PinHeader_1x07_P2.54mm_Vertical | J6 |
| 1 | SIG Line | PinHeader_1x07_P2.54mm_Vertical | J7 |
Surface-Level-Vehicle design files
The KiCad project lives in the VSSUT-Robotics-Society/Surface-Level-Vehicle repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/SLV v1.0.kicad_pcb
- SchematicPCB/SLV v1.0.kicad_sch
Surface-Level-Vehicle: common questions
What microcontroller does the Surface-Level-Vehicle use?
The Surface-Level-Vehicle is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Surface-Level-Vehicle PCB?
The Surface-Level-Vehicle measures 38.5 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Surface-Level-Vehicle?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Surface-Level-Vehicle design files?
From the VSSUT-Robotics-Society/Surface-Level-Vehicle repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Surface-Level-Vehicle design in my own project?
The repository has no license, so all rights stay with VSSUT-Robotics-Society. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Surface-Level-Vehicle without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k