STM32-Kicad design

vvignesh1182-coder·STM32-Kicad-design

STM32-Kicad design PCB layout, top view — open source STM32 board by vvignesh1182-coder

About the STM32-Kicad design PCB

STM32-Kicad design is an open source STM32 PCB design by vvignesh1182-coder, published on GitHub. It is a 2-layer board measuring 42.2 × 33 mm, with 27 components from 16 distinct parts.

Its main chip is the STM32F103C8TX, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 12 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

From the project

STM32-based 2-layer PCB design featuring custom power distribution, ground zones, and full KiCad schematic/layout files.

A custom 2-layer Printed Circuit Board (PCB) designed around the STM32 microcontroller. This repository contains the complete open-source hardware files, schematics, PCB layouts, and manufacturing outputs created using KiCad.

🛠️ Tools & Requirements Design Software: KiCad (v8.0 or compatible version recommended)

⚙️ Getting Started Clone the repository:

Bash git clone https://github.com/vvignesh1182-coder/STM32-Kicad-design.git Open KiCad, select File > Open Project, and choose the .kicad_pro file from the repository directory.

Main components on the STM32-Kicad design

STM32-Kicad design bill of materials (BOM)

27 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F103C8TX
STM32F103C8Tx
U1
1
AMS1117-3.3
U2
1
16MHZ
16MHz
Y1
1
USB_B_Micro
J1
3
CONN_01X04_PIN
Conn_01x04_Pin
J2, J3, J4
1
SW_SPDT
SW1
1
RED
D1
1
120R
FB1
4
100N
100n
C1, C2, C3, C8
1
10U
10u
C4
1
10N
10n
C5
2
1u
C6, C7
2
10P
10p
C9, C10
2
22U
22u
C11, C12
1
10K
R1
4
1.5K
1.5k
R2, R3, R4, R5

STM32-Kicad design design files

The KiCad project lives in the vvignesh1182-coder/STM32-Kicad-design repository on GitHub; these links point at the commit this page was built from.

STM32-Kicad design: common questions

What microcontroller does the STM32-Kicad design use?

The STM32-Kicad design is built around the STM32F103C8TX, from the STM32 family.

How big is the STM32-Kicad design PCB?

The STM32-Kicad design measures 42.2 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32-Kicad design?

27 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32-Kicad design design files?

From the vvignesh1182-coder/STM32-Kicad-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32-Kicad design design in my own project?

The repository has no license, so all rights stay with vvignesh1182-coder. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32-Kicad design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards