Ego coil
wardnb·ego-coil·pcb/ego-coil.net
About the Ego coil PCB
Ego coil is an open source PCB design by wardnb, published on GitHub under the CERN-OHL-P-2.0 license. It is a board, with 60 components from 33 distinct parts.
Other key parts include the TC4420CPA, INA180A2, HDR4 and HDR20. By type, the board carries 18 resistors, 10 connectors, 10 capacitors, 4 ICs, 4 transistors and 4 diodes.
From the project
One 2-layer, 2 oz board, 100 × 80 mm, carrying the whole body electronics: ZVS power stage, main switch and shunt, supplies, and a socketed Pico. The head's cap bank is not on this board (it lives in the head, see docs/design.md).
One 2-layer, 2 oz board, 100 × 80 mm, carrying the whole body electronics: ZVS power stage, main switch and shunt, supplies, and a socketed Pico. The head's cap bank is not on this board (it lives in the head, see docs/design.md).
1. pip install skidl && python pcb/netlist.py (only if you change the circuit). 2. KiCad 8 or 9 → new project ego-coil → open the PCB editor → File ▸ Import ▸ Netlist… → ego-coil.net. All footprints come from the standard KiCad libraries. Three are marked ADJUST in netlist.py: the two choke footprints (match the toroid you wind) and the two buck-module headers…
Main components on the Ego coil
Ego coil bill of materials (BOM)
60 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TC4420CPA | DIP-8_W7.62mm | U1 |
| 1 | INA180A2 | SOT-23-5 | U2 |
| 2 | HDR4 | PinHeader_1x04_P2.54mm_Vertical | U3, U4 |
| 2 | HDR20 | PinSocket_1x20_P2.54mm_Vertical | A1, A2 |
| 2 | IRFP4332 | TO-247-3_Vertical | Q1, Q2 |
| 1 | IRFB4110 | TO-220-3_Vertical | Q3 |
| 1 | 2N7002 | SOT-23 | Q4 |
| 4 | M4 | MountingHole_4.3mm_M4_Pad | J1, J2, J3, J4 |
| 4 | HDR2 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5, J6, J7, J10 |
| 1 | HDR3 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
| 1 | HDR4 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9 |
| 4 | M3 | MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 15V/1.3W | D_DO-41_SOD81_P10.16mm_Horizontal | ZD1, ZD2 |
| 1 | SMCJ70A | D_SMC | D5 |
| 1 | 1N4148W | D_SOD-123 | D6 |
| 2 | UF4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D7, D8 |
| 2 | 47UH/20A 47uH/20A | L_Toroid_Horizontal_D28.0mm_P30.00mm_Fastron_DSP | L1, L2 |
| 2 | 1000UF/100V 1000uF/100V | CP_Radial_D18.0mm_P7.50mm | C1, C2 |
| 2 | 1UF/100V 1uF/100V | C_1210_3225Metric | C3, C4 |
| 2 | 100NF 100nF | C_0603_1608Metric | C5, C7 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10NF 10nF | C_0603_1608Metric | C6 |
| 1 | 100UF/25V 100uF/25V | CP_Radial_D6.3mm_P2.50mm | C8 |
| 1 | 10UF 10uF | C_0805_2012Metric | C9 |
| 1 | 1UF 1uF | C_0805_2012Metric | C10 |
| 2 | 100R/3W | R_Axial_DIN0918_L18.0mm_D6.0mm_P22.86mm_Horizontal | R1, R2 |
| 1 | 100R/5W | R_Axial_Power_L20.0mm_W6.4mm_P25.40mm | R3 |
| 1 | 10R | R_0805_2012Metric | R4 |
| 5 | 10K 10k | R_0805_2012Metric | R5, R11, R12, R17, R18 |
| 2 | 2MR/3W 2mR/3W | R_2512_6332Metric | R6, R7 |
| 2 | 1k | R_0805_2012Metric | R8, R13 |
| 1 | 100K 100k | R_0805_2012Metric | R9 |
| 1 | 5.6K 5.6k | R_0805_2012Metric | R10 |
| 3 | 330R | R_0805_2012Metric | R14, R15, R16 |
Ego coil design files
The KiCad project lives in the wardnb/ego-coil repository on GitHub; these links point at the commit this page was built from.
- Netlistpcb/ego-coil.net
- BOMpcb/bom.csv
Ego coil: common questions
How many components are on the Ego coil?
60 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ego coil design files?
From the wardnb/ego-coil repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.
Can I use the Ego coil design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which wardnb chose for the repository.