Mesh bot
waterbearfieldschool·mesh-bot·v1/hardware/meshbot_kicad_v1/meshbot_kicad_v1.kicad_pcb
About the Mesh bot PCB
Mesh bot is an open source PCB design by waterbearfieldschool, published on GitHub. It is a 2-layer board measuring 88 × 72.7 mm, with 33 components from 17 distinct parts.
Other key parts include the wio-sx1262, nice_nano_clean and grove_a. By type, the board carries 12 connectors, 8 switches, 7 resistors, 5 ICs and 1 diode.
Main components on the Mesh bot
Mesh bot bill of materials (BOM)
33 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | wio-sx1262 SenseCAP | wio-sx1262 | U1 |
| 2 | nice_nano_clean | nice_nano_cleanest | U2, U3 |
| 1 | grove_a | grove_a | U4 |
| 1 | grove_a | grove_rightangle | U5 |
| 1 | Conn_01x02_Socket | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_01x04_Pin | gps_ublox_blue | J2 |
| 2 | Conn_01x04_Pin | ssd1306_a | J3, J5 |
| 1 | Conn_01x01_Socket | PinSocket_1x01_P2.54mm_Vertical | J4 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J6 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J7 |
| 1 | Conn_01x03_Socket | usual_switch | J8 |
| 1 | Conn_01x02_Socket | Buzzer_12x9.5RM7.6 | J9 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J11, J12 |
| 1 | Conn_01x08_Socket | PinSocket_1x08_P2.54mm_Vertical | J13 |
| 8 | SW_Push | SW_Tactile_SPST_Angled_PTS645Vx31-2LFS | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 1 | LED | LED_D3.0mm | D2 |
| 7 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2, R3, R4, R5, R6, R7 |
Mesh bot design files
The KiCad project lives in the waterbearfieldschool/mesh-bot repository on GitHub; these links point at the commit this page was built from.
Mesh bot: common questions
How big is the Mesh bot PCB?
The Mesh bot measures 88 × 72.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mesh bot?
33 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mesh bot design files?
From the waterbearfieldschool/mesh-bot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mesh bot design in my own project?
The repository has no license, so all rights stay with waterbearfieldschool. Use it as a reference, and ask the author before reusing the design.
Earlier revisions in the repo: meshbot_kicad