HAUptic paddle
WeBRLab·hAUptic-paddle·Electrical/PCB/hauptic_pcb/hauptic_pcb.kicad_pcb
About the HAUptic paddle PCB
HAUptic paddle is an open source PCB design by WeBRLab, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 54.1 × 40.6 mm, with 9 components from 5 distinct parts.
It belongs with the displays & leds designs in this gallery.
From the project
This repository contains the design files and software for a single-DOF haptic display for STEM education.
Instructions for flashing new code in Python:
1. Follow this tutorial to install micropython and configure micropython interpretter on logic board: https://docs.sunfounder.com/projects/thales-kit/en/latest/micropython/pythonstart/installmicropythontopico.html
2. Run or Save your code on the RPI logic board as "main.py"
3. (optional) eject and re-insert USB cable to start code automatically.
HAUptic paddle bill of materials (BOM)
9 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x10_Female | PinSocket_1x10_P2.54mm_Vertical | Communication1 |
| 2 | Conn_01x07_Female | PinSocket_1x07_P2.54mm_Vertical | Logic_board1, Logic_board2 |
| 2 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | Main_power1, Motor_power1 |
| 2 | Conn_01x08_Female | PinSocket_1x08_P2.54mm_Vertical | Motor_driver1, Motor_driver2 |
| 2 | Conn_01x03_Female | PinSocket_1x03_P2.54mm_Vertical | Power_regulator1, Sensor1 |
HAUptic paddle design files
The KiCad project lives in the WeBRLab/hAUptic-paddle repository on GitHub; these links point at the commit this page was built from.
HAUptic paddle: common questions
How big is the HAUptic paddle PCB?
The HAUptic paddle measures 54.1 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HAUptic paddle?
9 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HAUptic paddle design files?
From the WeBRLab/hAUptic-paddle repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the HAUptic paddle design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which WeBRLab chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k