ATM90E36 Breakout
About the ATM90E36 Breakout
ATM90E36 Breakout is an open source PCB design by whatnick, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 74 components from 20 distinct parts.
Other key parts include the ATM90E36A-AU-R. By type, the board carries 28 resistors, 21 capacitors, 4 LEDs, 3 jumpers, 1 IC and 1 transistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
KiCAD port of ATM90E36 Breakout PCB
Basic PCB for driver development and experimenting with the the ATM90E3x series of energy monitor ASICS. This is the KiCAD port of the original Eagle PCB.
Arduino Drivers are available here, maintained by CircuitSetup. Also checkout the Split Single-phase Energy Monitor.
Main components on the ATM90E36 Breakout
ATM90E36 Breakout bill of materials (BOM)
74 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATM90E36A-AU-R ATM90E36 | TQFP48 | IC1 |
| 1 | ECS-160-10-36-CKM FA-128 | FA-128 | Q1 |
| 4 | SJ-3523-SMT AudioJack3 | Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | CTA1, CTB1, CTC1, CTN1 |
| 3 | JUMPER-PAD-3-NOFULL_BOX_SILK | PAD-JUMPER-3-NO_YES_SILK_FULL_BOX | DMA1, PM0, PM1 |
| 4 | MountingHole | Hole0, Hole1, Hole2, Hole3 | |
| 1 | SPI | 1X06_LOCK | JP1 |
| 1 | DIG | 1X06_LOCK | JP2 |
| 1 | CF | 1X04_LOCK | JP3 |
| 2 | 20020327-C021B01LF GREEN-2P-3.5 | H2-3.5-7.0X7.0MM | UAUB1, UCUN1 |
| 3 | ZX | SMD1,27-2,54 | ZX0, ZX1, ZX2 |
| 4 | LTST-C193KRKT-5A RED | CHIP-LED0603 | LED1, LED2, LED3, LED4 |
| 14 | C0603C183K5RACTU 18n | C0603 | C1, C2, C3, C4, C5, C6, C7, C8 +6 |
| 2 | GRM21BR61E106MA73L 10u | C0805 | C12, C19 |
| 5 | C0603C104K5RAC3190 100n | C0603 | C13, C15, C17, C18, C21 |
| 8 | CRL0603-FW-2R40ELF 2.4R | R0603 | R1, R2, R3, R4, R15, R16, R17, R18 |
| 14 | RT0603FRE071KL 1K | R0603 | R5, R6, R7, R8, R9, R11, R13, R19 +6 |
| 3 | RC0603FR-07100KL 100K | R0603 | R10, R12, R14 |
| 1 | RC0201JR-0710KL 10K | R0603 | R26 |
| 1 | YC164-JR-071KL 1K | RA1206-8 | R27 |
| 1 | YC164-JR-0710KL 10K | RA1206-8 | R36 |
ATM90E36 Breakout design files
The KiCad project lives in the whatnick/ATM90E36_Breakout_KiCAD repository on GitHub; these links point at the commit this page was built from.
ATM90E36 Breakout: common questions
How big is the ATM90E36 Breakout?
The ATM90E36 Breakout measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ATM90E36 Breakout?
74 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ATM90E36 Breakout design files?
From the whatnick/ATM90E36_Breakout_KiCAD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ATM90E36 Breakout design in my own project?
The repository has no license, so all rights stay with whatnick. Use it as a reference, and ask the author before reusing the design.
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979