Pressure mat
willowec·pressure-mat·board_kicad/board.kicad_pcb
About the Pressure mat PCB
Pressure mat is an open source PCB design by willowec, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 118 components from 13 distinct parts.
Other key parts include the 74HC595 and MAX11643EEG. By type, the board carries 56 diodes, 28 resistors, 20 capacitors, 9 ICs and 4 connectors.
From the project
UMaine computer engineering capstone
This git repository contains all the code developed for the Electrical and Computer Engineering Capstone project of Evan Desmond and Willow Cunningham at the University of Maine, Orono.
The pressure sensing mat uses the intersections between rows and columns of copper tape separated by velostat to form resistive pressure sensors. The mat has 28 rows and 56 columns, for a total of 1568 sensors at a resolution of 1cm^2.

Main components on the Pressure mat
Pressure mat bill of materials (BOM)
118 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 74HC595 | DIP-16_W7.62mm | U1, U2, U3, U4, U5, U6, U7 |
| 2 | MAX11643EEG | SSOP-24_3.9x8.7mm_P0.635mm | U8, U9 |
| 1 | 02x30_Shift_Register_Connector | PinHeader_2x30_P2.54mm_Vertical | J1 |
| 1 | 02x30_ADC_Connector | PinHeader_2x30_P2.54mm_Vertical | J2 |
| 1 | PicoPinSocketB | PinSocket_1x20_P2.54mm_Vertical | J3 |
| 1 | PicoPinSocketA | PinSocket_1x20_P2.54mm_Vertical | J4 |
| 1 | BLM21BD272SN1L | BEADC2012X145N | FL1 |
| 56 | MMSD4148 | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +48 |
| 7 | 1uF | C_0603_1608Metric | C1, C3, C5, C7, C9, C11, C13 |
| 7 | 0.1uF | C_0603_1608Metric | C2, C4, C6, C8, C10, C12, C14 |
| 4 | .1uF | C_0603_1608Metric | C15, C16, C17, C18 |
| 2 | 4.7mF | CP_Radial_D13.0mm_P5.00mm | C19, C20 |
| 28 | 100k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +20 |
Pressure mat design files
The KiCad project lives in the willowec/pressure-mat repository on GitHub; these links point at the commit this page was built from.
- Layoutboard_kicad/board.kicad_pcb
- Schematicboard_kicad/board.kicad_sch
Pressure mat: common questions
How big is the Pressure mat PCB?
The Pressure mat measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pressure mat?
118 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pressure mat design files?
From the willowec/pressure-mat repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pressure mat design in my own project?
The repository has no license, so all rights stay with willowec. Use it as a reference, and ask the author before reusing the design.