Prometheus pcb harness
wilsonchenghy·prometheus-pcb-harness·examples/netlist/blinker_sch.net
About the Prometheus pcb harness
Prometheus pcb harness is an open source PCB design by wilsonchenghy, published on GitHub under the Apache-2.0 license. It is a board, with 9 components from 9 distinct parts.
Other key parts include the NE555DR. By type, the board carries 3 resistors, 2 capacitors, 1 IC, 1 connector, 1 test point and 1 diode.
From the project
An AI agent that helps you make professional-grade PCBs.
An AI agent that helps you make professional-grade PCBs.
- Source parts: real KiCad footprints, LCSC numbers and carts for JLCPCB, DigiKey and Mouser - Prototype a board: from your requirements to Gerbers, BOM and pick-and-place - Import a design: start from your KiCad board or your schematic's netlist - Do a revision: ask for a change, and every check runs again on the whole board
Main components on the Prometheus pcb harness
Prometheus pcb harness bill of materials (BOM)
9 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555DR NE555 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | C3020560 5V in | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | TestPoint | TP1 | |
| 1 | C2286 red | LED_0603_1608Metric | D1 |
| 1 | 100N 10u | C_0603_1608Metric | C1 |
| 1 | 100N 100n | C_0603_1608Metric | C2 |
| 1 | 5.1K 1k | R_0603_1608Metric | R1 |
| 1 | 5.1K 47k | R_0603_1608Metric | R2 |
| 1 | 1.5K 330 | R_0603_1608Metric | R3 |
Prometheus pcb harness design files
The KiCad project lives in the wilsonchenghy/prometheus-pcb-harness repository on GitHub; these links point at the commit this page was built from.
Prometheus pcb harness: common questions
How many components are on the Prometheus pcb harness?
9 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Prometheus pcb harness design files?
From the wilsonchenghy/prometheus-pcb-harness repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.
Can I use the Prometheus pcb harness design in my own project?
Yes, under the terms of its Apache-2.0 license, which wilsonchenghy chose for the repository.