19 open source boards using the NE555DR

Real designs built with the NE555DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the NE555DR

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the NE555DR connects to, and the resistors, capacitors and other passives placed on it.

  • The THRES pin has a capacitor to GND on 11 of 14 designs, most often 10 µF (then 100 nF).
  • The CONT pin has a capacitor to GND on 9 of 14 designs, most often 10 nF (then 100 nF).
  • The RESET pin is tied to 5V on 10 of 14 designs (a signal on 4).
  • The DISCH pin has a pull-up to 5V on 8 of 14 designs, most often 10 kΩ (then 1 kΩ).
GNDpin 1Connected to: GND 79% · a signal 21%
TRIGpin 2Connected to: Signal 100%
  • Capacitor to GND on 43% · 100 nF (3), 100 pF (1), 1 nF (1)
RESETpin 4Connected to: 5V 71% · a signal 29%
CONTpin 5Connected to: Signal 79% · not connected 21%
  • Capacitor to GND on 64% · 10 nF (8), 100 nF (1)
THRESpin 6Connected to: Signal 100%
  • Capacitor to GND on 79% · 10 µF (4), 100 nF (2), 100 pF (1)
  • Pull-up to 5V on 36% · 10 kΩ (2), 47 kΩ (1), 20 kΩ (1)
  • Series resistor on 36% · 47 kΩ (1), 200 kΩ (1), 1 kΩ (1)
DISCHpin 7Connected to: Signal 86%
  • Pull-up to 5V on 57% · 10 kΩ (4), 1 kΩ (1), 20 kΩ (1)
  • Series resistor on 43% · 1 kΩ (2), 47 kΩ (1), 200 kΩ (1)
  • Capacitor to GND on 36% · 10 µF (3), 1 µF (1)
VCCpin 8Connected to: 5V 71% · a signal 29%
  • Decoupling capacitor on 43% · 100 nF (4), 330 nF (1), 10 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amiga-SMD-500 by amigalisa, BufferVariator RevB by kanengomibako, 74Logic SA ADC by schilkp and BSPD by LSUTigerRacing.

The NE555DR in open source designs

The gallery holds 19 open source boards using the NE555DR from 17 GitHub repositories; a typical one measures about 89.2 × 71.5 mm and carries around 30 components.

94% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.

The most starred is Amiga-SMD-500 by amigalisa.

Microcontrollers on boards using the NE555DR

NE555DR: common questions

Where can I find a NE555DR reference design?

Each of the 19 boards on this page is a real design using the NE555DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NE555DR THRES pin connected?

The THRES pin has a capacitor to GND on 11 of 14 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the NE555DR.

How is the NE555DR CONT pin connected?

The CONT pin has a capacitor to GND on 9 of 14 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the NE555DR.

How is the NE555DR RESET pin connected?

The RESET pin is tied to 5V on 10 of 14 designs (a signal on 4). Counted from the KiCad layouts of 14 open source designs using the NE555DR.

What parts are used alongside the NE555DR?

The 641964-1, LM339DR, R-78E5.0-0.5, SN74AC32DR and SN74LVC1G08DBVR appear in the most repositories here.

Which microcontrollers do boards using the NE555DR use?

Most are built on ESP32 (3) and RP2040/RP2350 (2).

How big is a typical board using the NE555DR?

The median is 89.2 × 71.5 mm, and 94% are two-layer designs.

What is the most popular open source board using the NE555DR?

By GitHub stars, Amiga-SMD-500 by amigalisa, with 69 stars.

Can I simulate one of these boards using the NE555DR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part