USBC-UART
wirenux·USBC-UART
About the USBC-UART PCB
USBC-UART is an open source PCB design by wirenux, published on GitHub under the MIT license. It is a 2-layer board measuring 39 × 19 mm, with 17 components from 12 distinct parts.
Other key parts include the FT232RL. By type, the board carries 6 resistors, 4 connectors, 3 diodes, 3 capacitors and 1 IC.
From the project
A simple project to convert a traditional USB-B UART bridge schematic to a modern USB-C interface.
A simple project to convert a traditional USB-B UART bridge schematic to a modern USB-C interface.
For the device to work with USB-C to USB-C cables, you must add two resistors to the configuration pins:
CC1 (Pin A5): Connect a 5.1kΩ resistor to GND. CC2 (Pin B5): Connect a 5.1kΩ resistor to GND.

Main components on the USBC-UART
USBC-UART bill of materials (BOM)
17 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | Connector, USB-TYPE-C-16P | TYPE-C-SMD_HX-TYPE-C-16PIN | J1 |
| 2 | Conn_01x09_Pin | PinHeader_1x09_P2.54mm_Vertical | J2, J4 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Horizontal | J3 |
| 1 | Red Hubei KENTO Elec | D_0603 | D1 |
| 2 | Green Hubei KENTO Elec | D_0805 | D2, D3 |
| 1 | 100nF Samsung Electro-Mechanics | C_0402 | C1 |
| 1 | 10uF AVX | C_CASE-A-3216-18(mm) | C2 |
| 1 | 1uF Samsung Electro-Mechanics | C_0402 | C3 |
| 2 | 5.1kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R1, R2 |
| 1 | 0Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R3 |
| 3 | 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R4, R5, R6 |
USBC-UART design files
The KiCad project lives in the wirenux/USBC-UART repository on GitHub; these links point at the commit this page was built from.
- LayoutUSB-UART.kicad_pcb
- SchematicUSB-UART.kicad_sch
USBC-UART: common questions
How big is the USBC-UART PCB?
The USBC-UART measures 39 × 19 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USBC-UART?
17 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the USBC-UART design files?
From the wirenux/USBC-UART repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USBC-UART design in my own project?
Yes, under the terms of its MIT license, which wirenux chose for the repository.