HardLabs

Flu excite

wlatif-cmyk·100daysofprojects·kicad/algaephotobioreactor/algae_photobioreactor/flu_excite.kicad_pcb

Flu excite PCB layout, top view — open source board by wlatif-cmyk

About the Flu excite PCB

Flu excite is an open source PCB design by wlatif-cmyk, published on GitHub. It is a 2-layer board measuring 25 × 26.5 mm, with 8 components from 8 distinct parts.

By type, the board carries 3 resistors, 1 transistor, 1 LED and 1 diode.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

100 days of 100 projects ;)

https://www.tiktok.com/@yappingaddiction

https://www.instagram.com/yappingaddiction/

Every day, I build something small, fun, or weird — and post it on TikTok.

This repo collects the code, notes, and mini-projects from each day.

Follow along as this slowly turns into a chaotic but glorious archive of experiments.

Day 2 — Light meter that runs off of ultrasonic sensor

Flu excite bill of materials (BOM)

8 components, 8 distinct parts.

QtyPartRefs
1
Q_NMOS_GDS
Q1
1
GND
24V1
1
GND
EXCITE_EN1
1
LED-
LED+1
1
LED
D1
1
100k
R1
1
100
R2
1
R
R4

Flu excite design files

The KiCad project lives in the wlatif-cmyk/100daysofprojects repository on GitHub; these links point at the commit this page was built from.

Flu excite: common questions

How big is the Flu excite PCB?

The Flu excite measures 25 × 26.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Flu excite?

8 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Flu excite design files?

From the wlatif-cmyk/100daysofprojects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Flu excite design in my own project?

The repository has no license, so all rights stay with wlatif-cmyk. Use it as a reference, and ask the author before reusing the design.

More boards in 100daysofprojects

Similar boards