Jellyfish lights
About the Jellyfish lights PCB
Jellyfish lights is an open source PCB design by wszeto9, published on GitHub under the MIT license. It is a 2-layer board measuring 28 × 28 mm, with 24 components from 17 distinct parts.
Other key parts include the SN74LVC1G14DBVR. By type, the board carries 6 capacitors, 6 resistors, 5 diodes, 2 jumpers, 2 switches and 1 IC.
From the project
PCA for Jellyfish themed yo-yos for my 2.008 project
Main components on the Jellyfish lights
Jellyfish lights bill of materials (BOM)
24 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74LVC1G14DBVR | SOT-23-5 | U1 |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | Battery_Cell | BatteryHolder_Keystone_3002_1x2032 | BT1 |
| 1 | nFade | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | alwaysOn | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | tilt switch | C_Radial_D6.3mm_H5.0mm_P2.50mm | SW1 |
| 1 | tilt switch | tilt_switch | SW2 |
| 1 | C84265 3mm THT LED | LED_D5.0mm_FlatTop | D1 |
| 4 | NCD0603W1 | LED_0603_1608Metric | D2, D3, D6, D7 |
| 1 | 1UF 1uF | C_0402_1005Metric | C1 |
| 1 | 100NF 100nF | C_0402_1005Metric | C2 |
| 1 | 4.7UF 4.7uF | C_0402_1005Metric | C3 |
| 3 | DNP | C_1206_3216Metric | C4, C5, C6 |
| 1 | 1M | R_0402_1005Metric | R1 |
| 2 | C21189 0R | R_0603_1608Metric | R2, R6 |
| 2 | 10R | R_0603_1608Metric | R3, R5 |
| 1 | 330K 330k | R_0402_1005Metric | R4 |
Jellyfish lights design files
The KiCad project lives in the wszeto9/2.008-Jellyfish repository on GitHub; these links point at the commit this page was built from.
Jellyfish lights: common questions
How big is the Jellyfish lights PCB?
The Jellyfish lights measures 28 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jellyfish lights?
24 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jellyfish lights design files?
From the wszeto9/2.008-Jellyfish repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Jellyfish lights design in my own project?
Yes, under the terms of its MIT license, which wszeto9 chose for the repository.
