Kicad introduction

wuespace·kicad-introduction·tasks/baby-steps/baby-steps.kicad_pcb

Kicad introduction PCB layout, top view — open source board by wuespace

About the Kicad introduction PCB

Kicad introduction is an open source PCB design by wuespace, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 40.6 × 31.8 mm, with 9 components from 6 distinct parts.

Other key parts include the LMC6482. By type, the board carries 3 resistors, 2 capacitors, 1 IC, 1 connector and 1 diode.

From the project

The materials (slides, ...) from the KiCAD introduction workshop at WüSpace e. V.

This project hosts the source files for a lecture about the ECAD tool KiCad.

The presentation is done with LaTex beamer. The style file is custom tailored to the WüSpace CI guidelines (roboto and comfortaa font, correct accent purple) and can be swapped out if holding the lecture in a different context.

This folder is for KiCAD project files that correspond to the lecture. Currently there's only the project baby-steps but more can be added for further advanced lectures.

Main components on the Kicad introduction

Kicad introduction bill of materials (BOM)

9 components, 6 distinct parts.

QtyPartRefs
1
LMC6482
U1
1
Conn_01x03
J1
1
R_Potentiometer
RV1
1
D
D1
2
C
C1, C2
3
R
R1, R2, R3

Kicad introduction design files

The KiCad project lives in the wuespace/kicad-introduction repository on GitHub; these links point at the commit this page was built from.

Kicad introduction: common questions

How big is the Kicad introduction PCB?

The Kicad introduction measures 40.6 × 31.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kicad introduction?

9 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kicad introduction design files?

From the wuespace/kicad-introduction repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Kicad introduction design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which wuespace chose for the repository.