Plasma Pilot3
About the Plasma Pilot3 PCB
Plasma Pilot3 is an open source AVR/Arduino PCB design by xdmattz, published on GitHub. It is a 2-layer board measuring 85.1 × 38.1 mm, with 78 components from 35 distinct parts.
Its main chip is the ATTINY861A-S, from the AVR/Arduino family. Other key parts include the LT1129CST-5 and LMC7101. By type, the board carries 25 resistors, 18 capacitors, 10 test points, 8 connectors, 5 transistors and 4 ICs.
From the project
Pilot Arc Circuit and Code for cheap chinese HF start plasma cutters
This project is for a circuit that adds a pilot arc function to a cheap chinese plasma cutter. ie. CT520D and others.
Main components on the Plasma Pilot3
Plasma Pilot3 bill of materials (BOM)
78 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY861A-S | soic-20 | IC1 |
| 1 | LT1129CST-5 | SOT-223 | U1 |
| 2 | LMC7101 | sot-23-5 | U2, U3 |
| 3 | BSS138 | sot-23 | Q1, Q2, Q4 |
| 1 | Q_NIGBT_GEC | TO-247-3_Vertical | Q3 |
| 1 | FMMT3904 | SOT-23 | Q5 |
| 1 | CONN_02X03 | PinHeader_2x03_P2.54mm_Vertical | P1 |
| 5 | CONN_01X02 | TerminalBlock5_08mm_x2 | P2, P3, P4, P5, P6 |
| 2 | CONN_01X03 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | P7, P8 |
| 3 | TP | MTG_200_125D | MTG1, MTG2, MTG3 |
| 1 | EP10_GDT | EP10_SMT | T1 |
| 3 | TP | TP80 | TP1, TP3, TP4 |
| 2 | TP | TP160 | TP2, TP10 |
| 1 | TP | TP100 | TP5 |
| 4 | TP | TP50 | TP6, TP7, TP8, TP9 |
| 1 | MOV | MOV_20mm | Z1 |
| 2 | BAV99 | sot-23 | D1, D2 |
| 1 | BAV3004W | D_SOD-123F | D3 |
| 3 | 10uF | cap_1210 | C1, C2, C4 |
| 1 | 1000pF | cap_0805 | C3 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 0.1uF | cap_0603 | C5, C6, C11, C13, C14, C15, C17 |
| 3 | 0.1uF | cap_0805 | C7, C8, C9 |
| 1 | 0.1uF | Cap_Rad_13x6mm | C10 |
| 2 | 1000pF | cap_0603 | C12, C18 |
| 1 | 47uF | CP_Elec_8x6.9 | C16 |
| 9 | 10K | res_0603 | R1, R2, R3, R4, R7, R15, R16, R20 +1 |
| 2 | 22K | res_0805 | R5, R6 |
| 1 | 10 | res_0805 | R8 |
| 1 | 4.7K | res_0805 | R9 |
| 7 | Res6 | res_0603 | R11, R12, R17, R18, R24, R25, R26 |
| 1 | 220 | res_0603 | R13 |
| 1 | 10 | res_0603 | R14 |
| 1 | 1000 | res_0805 | R19 |
| 1 | 10 | res_1206 | R22 |
| 1 | Res6 | res_1206 | R23 |
Plasma Pilot3 design files
The KiCad project lives in the xdmattz/Plasma-Starter repository on GitHub; these links point at the commit this page was built from.
Plasma Pilot3: common questions
What microcontroller does the Plasma Pilot3 use?
The Plasma Pilot3 is built around the ATTINY861A-S, from the AVR/Arduino family.
How big is the Plasma Pilot3 PCB?
The Plasma Pilot3 measures 85.1 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Plasma Pilot3?
78 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Plasma Pilot3 design files?
From the xdmattz/Plasma-Starter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Plasma Pilot3 design in my own project?
The repository has no license, so all rights stay with xdmattz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Plasma Pilot3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Plasma-Starter
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k