Soil pH AFE
xmyoot·guarded-ph-acquisition-module·hardware/Soil_pH_AFE/Soil_pH_AFE.kicad_pcb
About the Soil pH AFE PCB
Soil pH AFE is an open source PCB design by xmyoot, published on GitHub. It is a 2-layer board measuring 50 × 35 mm, with 28 components from 17 distinct parts.
Other key parts include the LMP91200MTX/NOPB, ADS112C04IPWR, REF3220AIDBVT, TPS7A2033PDBVR and TPS3839K33DBZT. By type, the board carries 13 capacitors, 8 resistors, 5 ICs and 2 connectors.
From the project
Guarded pH analog front end: KiCad design, fabrication files, ESP32-S3 bring-up firmware and engineering review. Unbuilt prototype.
Rev A · engineering prototype · CAD reviewed 21 October 2026 · unbuilt / hardware validation pending
A 50 × 35 mm, two-layer pH analog front end for an external ESP32-S3 host. The design combines an LMP91200 electrode buffer, ADS112C04 16-bit delta-sigma ADC, REF3220 2.048 V reference, and a quiet 3.3 V supply with delayed reference enable.
CAD rendering, not a photograph. The BNC connector is a drawing-derived visualization with threaded barrel, bayonet lugs and socket; small details are approximate, not vendor mechanical CAD.

Main components on the Soil pH AFE
Soil pH AFE bill of materials (BOM)
28 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMP91200MTX/NOPB LMP91200 Texas Instruments | TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | ADS112C04IPWR ADS112C04 Texas Instruments | TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | REF3220AIDBVT REF3220 / 2.048V Texas Instruments | SOT-23-6 | U3 |
| 1 | TPS7A2033PDBVR TPS7A2033 / 3.3V Texas Instruments | SOT-23-5 | U4 |
| 1 | TPS3839K33DBZT TPS3839K33 / 2.93V Texas Instruments | SOT-23 | U5 |
| 1 | 031-5431-1010 INSULATED BNC Amphenol RF | BNC_031-5431-1010 | J1 |
| 1 | B6B-PH-K-S(LF)(SN) HOST / JST PH6 JST | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J2 |
| 1 | GRM31CR71C106KA12L 10u Murata | C_1206_3216Metric | C1 |
| 3 | GRM188R71C105KA12D 1u Murata | C_0603_1608Metric | C2, C7, C11 |
| 6 | GRM188R71H104KA93D 100n Murata | C_0603_1608Metric | C3, C4, C5, C6, C8, C12 |
| 2 | GRM21BR71E475KA73L 4.7u Murata | C_0805_2012Metric | C9, C10 |
| 1 | GRM1885C1H103JA01D 10n C0G Murata | C_0603_1608Metric | C13 |
| 2 | TNPW06031K00BEEA 1k Vishay | R_0603_1608Metric | R1, R2 |
| 2 | CRCW06034K70FKEA 4.7k Vishay | R_0603_1608Metric | R3, R4 |
| 2 | CRCW06030000Z0EA 0R Vishay | R_0603_1608Metric | R5, R6 |
| 1 | CRCW060310K0FKEA 10k Vishay | R_0603_1608Metric | R7 |
| 1 | CRCW0603100KFKEA 100k Vishay | R_0603_1608Metric | R8 |
Soil pH AFE design files
The KiCad project lives in the xmyoot/guarded-ph-acquisition-module repository on GitHub; these links point at the commit this page was built from.
Soil pH AFE: common questions
How big is the Soil pH AFE PCB?
The Soil pH AFE measures 50 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soil pH AFE?
28 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soil pH AFE design files?
From the xmyoot/guarded-ph-acquisition-module repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soil pH AFE design in my own project?
The repository has no license, so all rights stay with xmyoot. Use it as a reference, and ask the author before reusing the design.