Kicaddemo
xtoolbox·kicaddemo
About the Kicaddemo PCB
Kicaddemo is an open source STM32 PCB design by xtoolbox, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 40 mm, with 69 components from 25 distinct parts.
Its main chip is the STM32F103CBT6, from the STM32 family. Other key parts include the SOT-23_XC6206P332MR, SP3485EN-L_TR_[C8963], CAN_TJA1051T_3_[C38695] and SP3232EEY-L_TR_[C13482]. By type, the board carries 32 resistors, 16 capacitors, 12 connectors, 5 ICs, 2 switches and 1 crystal.
From the project
KiCad DEMO project
Main components on the Kicaddemo
Kicaddemo bill of materials (BOM)
69 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SOT-23_XC6206P332MR | SOT-23-3L | U1 |
| 1 | STM32F103CBT6 | LQFP-48_7X7X05P | U2 |
| 1 | SP3485EN-L_TR_[C8963] | SOIC-8_150MIL | U3 |
| 1 | CAN_TJA1051T_3_[C38695] | SOIC-8_150MIL | U4 |
| 1 | SP3232EEY-L_TR_[C13482] | TSSOP-16 | U5 |
| 1 | SMD-5032_2P_8MHz_20ppm_20pF | SMD-5032_2P | Y1 |
| 1 | USB_B | USB_B | J1 |
| 2 | Conn_01x10 | Pin_Header_Straight_1x10_Pitch2.54mm | J2, J3 |
| 2 | Conn_01x04_3.81 | PhoenixContact_MC-G_04x3.81mm_Angled | J4, J5 |
| 1 | Conn_01x02 | Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 2 | Conn_01x06 | Pin_Header_Straight_1x06_Pitch2.54mm | J7, J11 |
| 3 | Conn_01x04 | Pin_Header_Straight_1x04_Pitch2.54mm | J8, J9, J12 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J13 |
| 2 | SW_Push | SW_SPST_B3S-1000 | SW1, SW2 |
| 1 | 0603_蓝灯 | 0603_LED_S1 | D1 |
| 12 | 0402_100nF__104_10%_16V | 0402_C | C1, C2, C3, C4, C6, C8, C9, C10 +4 |
| 2 | 0603_10uF__106_10%_10V | 0603_C | C5, C7 |
| 2 | 0402_20pF__200_5%_50V | 0402_C | C15, C16 |
| 4 | 0603_22Ω__22R0_1% | 0603_R | R1, R2, R28, R29 |
| 16 | 0603_10KΩ__1002_1% | 0603_R | R3, R4, R11, R12, R13, R14, R15, R16 +8 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0603_1KΩ__1001_1% | 0603_R | R5 |
| 7 | 0603_100Ω__1000_1% | 0603_R | R6, R7, R8, R22, R23, R24, R25 |
| 2 | 0603_120Ω__1200_1% | 0603_R | R9, R10 |
| 1 | 0603_1.5KΩ__1501_1% | 0603_R | R31 |
| 1 | 0603_1MΩ__1004_1% | 0603_R | R32 |
Kicaddemo design files
The KiCad project lives in the xtoolbox/kicaddemo repository on GitHub; these links point at the commit this page was built from.
- Layoutdemodiy.kicad_pcb
Kicaddemo: common questions
What microcontroller does the Kicaddemo use?
The Kicaddemo is built around the STM32F103CBT6, from the STM32 family.
How big is the Kicaddemo PCB?
The Kicaddemo measures 90 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicaddemo?
69 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicaddemo design files?
From the xtoolbox/kicaddemo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Kicaddemo design in my own project?
Yes, under the terms of its MIT license, which xtoolbox chose for the repository.
Can I test firmware for the Kicaddemo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k