54 open source boards using the STM32F103CBT6
Real designs built with the STM32F103CBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Ventilator Main Board
RespiraWorks
350 × 155 mm646 parts4LApache-2.0168STM32
Nuco v
dmitrystu
70 × 82.5 mm137 parts2LCERN-OHL-W-2.026STM32
Usb external display
dilshan
149.5 × 43.8 mm65 parts2LMIT16STM32
Reflow Hot Plate Control Board
ikajdan
80 × 80 mm95 parts2LMIT14STM32
Stm32mp1-custom devboard
voloviq
120 × 80.6 mm194 parts4LNo license7STM32
MidiBox3
Dethernal
100 × 100 mm114 parts2LMIT5STM32
Green Pill
lbthomsen
52.1 × 20.3 mm33 parts4LCustom license4STM32
Sensors Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm184 parts4LNo license3STM32
QRET 25-26 SRAD Hybrid Lower Control Module
Queens-Rocket-Engineering-Team
69.5 × 60 mm140 parts4LNo license2STM32
Mixed-Signal-Guitar-Effects-Pedal
danromero1
60 × 75 mm110 parts4LMIT2STM32
Course MixedSignal
dpmj
55 × 80 mm110 parts4LCERN-OHL-S-2.02STM32
Bluegrass
agrif
61 × 88.9 mm107 parts4LCC-BY-SA-4.02STM32
STM32F103CBT6-custom dev board
pushtiujeniya
36.4 × 24.3 mm29 parts2LNo license2STM32
Av instrumentation
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm184 parts4LNo license1STM32
QRET 25-26 SRAD Hybrid Lower Control Module
Queens-Rocket-Engineering-Team
69.5 × 60 mm140 parts4LNo license1STM32
Adacus
AoToS
68.6 × 88.9 mm111 parts4LNo license1STM32
QRET 23-24 SRAD Altimeter Module
Queens-Rocket-Engineering-Team
69.5 × 62.6 mm92 parts4LNo license1STM32
Color sensor
nevzathipertek
74 × 32 mm91 parts2LNo license1STM32
Roamer bot
kylestew
111.8 × 69.8 mm61 parts4LNo license1STM32
Fm radio
snakeye
60 × 17 mm41 parts4LNo license1STM32
VCU CM4
NTURacingTeam
100 × 90 mm445 parts4LNo license0STM32
Akkupack ng
eurovibes
110 × 80 mm139 parts4LNo license0STM32
Belegt
eurovibes
60 × 145 mm120 parts4LCERN-OHL-S-2.00STM32
Carte moteur
Pokibot-org
72.6 × 73.7 mm119 parts2LApache-2.00STM32
Mxed Signal
cristobalcuevas
60 × 75 mm110 parts4LNo license0STM32
SPECTRA-MX-1-
landjas09
60 × 75 mm110 parts4LNo license0STM32
MixSig
a-s-adam
59.9 × 73.3 mm110 parts4LNo license0STM32
Dcclicht
eurovibes
80 × 80 mm101 parts2LCERN-OHL-S-2.00STM32
Stm main
hcmos
70 × 85 mm96 parts2LNo license0STM32
GeoLock
sudo-junkie
75.1 × 62.9 mm91 parts2LGPL-2.00STM32
Kicaddemo
xtoolbox
90 × 40 mm69 parts2LMIT0STM32
Sarwan1494.github.io
Sarwan1494
42 × 42 mm67 parts4LNo license0STM32
Heracles
Peque
46.5 × 64.7 mm61 parts2LNo license0STM32
Linky
devisunofficial
38.5 × 41 mm29 parts2LNo license0STM32
Atmo monitor
gpgreen
60 × 66 mm21 parts2LMIT0STM32
MidiBox3 b
Dethernal
100 × 100 mm105 parts2LMIT5
How designs wire the STM32F103CBT6
Read from the KiCad layouts of 39 open source designs, one per repository: what each pin of the STM32F103CBT6 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 36 of 38 designs, most often 100 nF (then 10 µF).
- The PD0 pin has a crystal on 35 of 39 designs, most often 8 MHz (then 16 MHz).
- The PD0 pin has a capacitor to GND on 34 of 39 designs, most often 10 pF (then 20 pF).
- The NRST pin has a capacitor to GND on 34 of 39 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 90% |
|
| PC15pin 4 | Connected to: Not connected 72% · a signal 26% | — |
| PD0pin 5 | Connected to: Signal 95% |
|
| PD1pin 6 | Connected to: Signal 95% |
|
| NRSTpin 7 | Connected to: A connector 36% |
|
| VSSApin 8 | Connected to: GND 95% | — |
| VDDApin 9 | Connected to: 3.3V 97% |
|
| PA4pin 14 | Connected to: Signal 74% · not connected 26% |
|
| PA5pin 15 | Connected to: Signal 82% · not connected 18% |
|
| PB2pin 20 | Connected to: Signal 74% |
|
| VSSpin 23, 35, 47 | Connected to: GND 97% | — |
| VDDpin 24, 36, 48 | Connected to: 3.3V 100% |
|
| PB13pin 26 | Connected to: A connector 24% · not connected 16% |
|
| PA11pin 32 | Connected to: Signal 92% |
|
| PA12pin 33 | Connected to: Signal 79% · not connected 21% |
|
| PB4pin 40 | Connected to: Not connected 61% · a signal 39% | — |
| BOOT0pin 44 | Connected to: Signal 92% |
|
27 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ventilator Main Board by RespiraWorks, Nuco v by dmitrystu, Usb external display by dilshan and STLinkV2 by grumat.
The STM32F103CBT6 in open source designs
The gallery holds 54 open source boards using the STM32F103CBT6 from 40 GitHub repositories; a typical one measures about 69.5 × 65.3 mm and carries around 95 components.
61% use four copper layers or more, and 33% carry an open source license.
The most starred is Ventilator Main Board by RespiraWorks.
Parts used alongside the STM32F103CBT6
Microcontrollers on boards using the STM32F103CBT6
What boards using the STM32F103CBT6 are built for
STM32F103CBT6: common questions
Where can I find a STM32F103CBT6 reference design?
Each of the 54 boards on this page is a real design using the STM32F103CBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32F103CBT6 VDD pin?
The VDD pins have a decoupling capacitor on 36 of 38 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 39 open source designs using the STM32F103CBT6.
How is the STM32F103CBT6 PD0 pin connected?
The PD0 pin has a crystal on 35 of 39 designs, most often 8 MHz (then 16 MHz). Counted from the KiCad layouts of 39 open source designs using the STM32F103CBT6.
How is the STM32F103CBT6 NRST pin connected?
The NRST pin has a capacitor to GND on 34 of 39 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 39 open source designs using the STM32F103CBT6.
What parts are used alongside the STM32F103CBT6?
The USBLC6-2SC6, AMS1117-3.3, ADC141S626CIMM/NOPB, CP2102N-Axx-xQFN28 and HT7533-1 appear in the most repositories here.
Which microcontrollers do boards using the STM32F103CBT6 use?
Most are built on STM32 (54).
How big is a typical board using the STM32F103CBT6?
The median is 69.5 × 65.3 mm, and 39% are two-layer designs.
What is the most popular open source board using the STM32F103CBT6?
By GitHub stars, Ventilator Main Board by RespiraWorks, with 168 stars.
Can I simulate one of these boards using the STM32F103CBT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.