Cardspansion u5
XyrusB2010·Cardspansion·STM32U5/cardspansion-u5.kicad_pcb
About the Cardspansion u5 PCB
Cardspansion u5 is an open source STM32 PCB design by XyrusB2010, published on GitHub under the MIT license. It is a 2-layer board measuring 22 × 30 mm, with 7 components from 6 distinct parts.
Its main chip is the STM32U575RITx, from the STM32 family. By type, the board carries 2 crystals, 1 IC, 1 connector, 1 diode, 1 capacitor and 1 resistor.
From the project
A modular microcontroller system, featuring a customizable MCU
Main components on the Cardspansion u5
Cardspansion u5 bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32U575RITx | LQFP-64_10x10mm_P0.5mm | U1 |
| 2 | ASE-8MHZ | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1, Y2 |
| 1 | M2-E 2230 | M2-2230-E | J1 |
| 1 | PWR | LED_0805_2012Metric | D1 |
| 1 | 4.7UF | C_0805_2012Metric | C1 |
| 1 | 510 | R_0805_2012Metric | R1 |
Cardspansion u5 design files
The KiCad project lives in the XyrusB2010/Cardspansion repository on GitHub; these links point at the commit this page was built from.
Cardspansion u5: common questions
What microcontroller does the Cardspansion u5 use?
The Cardspansion u5 is built around the STM32U575RITx, from the STM32 family.
How big is the Cardspansion u5 PCB?
The Cardspansion u5 measures 22 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cardspansion u5?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cardspansion u5 design files?
From the XyrusB2010/Cardspansion repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cardspansion u5 design in my own project?
Yes, under the terms of its MIT license, which XyrusB2010 chose for the repository.
Can I test firmware for the Cardspansion u5 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Cardspansion
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k