CARDSPANSION-ESP
XyrusB2010·Cardspansion·ESP32/cardspansion-esp.kicad_pcb
About the CARDSPANSION-ESP PCB
CARDSPANSION-ESP is an open source ESP32 PCB design by XyrusB2010, published on GitHub under the MIT license. It is a 2-layer board measuring 22 × 30 mm, with 5 components from 5 distinct parts.
Its main chip is the CARDSPANSION-ESP, from the ESP32 family. By type, the board carries 1 crystal, 1 connector, 1 diode and 1 resistor.
It belongs with the iot & wireless designs in this gallery.
From the project
A modular microcontroller system, featuring a customizable MCU
CARDSPANSION-ESP bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ASE-32.768KHZ | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | M2-E 2230 | M2-2230-E | J1 |
| 1 | CARDSPANSION-ESP | ESP32-WROOM-32UE | WROOM32-UE |
| 1 | PWR | LED_0805_2012Metric | D1 |
| 1 | 510 | R_0805_2012Metric | R1 |
CARDSPANSION-ESP design files
The KiCad project lives in the XyrusB2010/Cardspansion repository on GitHub; these links point at the commit this page was built from.
CARDSPANSION-ESP: common questions
What microcontroller does the CARDSPANSION-ESP use?
The CARDSPANSION-ESP is built around the CARDSPANSION-ESP, from the ESP32 family.
How big is the CARDSPANSION-ESP PCB?
The CARDSPANSION-ESP measures 22 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CARDSPANSION-ESP?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the CARDSPANSION-ESP design files?
From the XyrusB2010/Cardspansion repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CARDSPANSION-ESP design in my own project?
Yes, under the terms of its MIT license, which XyrusB2010 chose for the repository.
Can I test firmware for the CARDSPANSION-ESP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Cardspansion
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k