Lily58 Pro
Ya3in13·my-Lily58-keyboard·Hardware/lily58/pcb/Lily58_Pro.kicad_pcb
About the Lily58 Pro PCB
Lily58 Pro is an open source PCB design by Ya3in13, published on GitHub. It is a 2-layer board measuring 142.5 × 106.3 mm, with 83 components from 13 distinct parts.
Other key parts include the ProMicro. By type, the board carries 29 switches, 29 diodes, 8 jumpers, 5 connectors, 2 resistors and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
این راهنما مراحل کامل مونتاژ و برنامهریزی کیبورد Lily58 را به زبان فارسی توضیح میدهد. لطفاً با دقت و طبق مراحل زیر پیش بروید تا از عملکرد صحیح کیبورد خود لذت ببرید.
این راهنما مراحل کامل مونتاژ و برنامهریزی کیبورد Lily58 را به زبان فارسی توضیح میدهد. لطفاً با دقت و طبق مراحل زیر پیش بروید تا از عملکرد صحیح کیبورد خود لذت ببرید.
my-Lily58-keyboard\Firmware\Firmware.hax
فایل نرم افزار برای اپلود فابل رو هم براتون توی ادرس زیر گذاشتم.
my-Lily58-keyboard\Firmware\qmk_firmware-lily58-rev1-lii.zip
🧪 تست عملکرد اتصال دو نیمه با کابل TRRS.
Main components on the Lily58 Pro
Lily58 Pro bill of materials (BOM)
83 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | ProMicro_rev2 | U1 |
| 1 | LED | LED | J1 |
| 1 | 4PIN | MJ-4PP-9 | J2 |
| 1 | OLED | OLED_4Pin | J3 |
| 2 | i2c_pin | 1pin_conn | P1, P2 |
| 8 | — | Jumper | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 1 | SW_RST | TACT_SWITCH_TVBP06 | RSW1 |
| 29 | SW_PUSH | CherryMX_KailhLowProfile_Hotswap_edge | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +21 |
| 2 | HOLE | M2_HOLE_PCB | TH1, TH2 |
| 5 | HOLE | HOLE_M2_TH | TH3, TH4, TH5, TH6, TH7 |
| 1 | jumper | jumper_data | W1 |
| 29 | D | Diode_SOD123 | D1, D2, D3, D4, D5, D6, D7, D8 +21 |
| 2 | R | RESISTOR_mini | R1, R2 |
Lily58 Pro design files
The KiCad project lives in the Ya3in13/my-Lily58-keyboard repository on GitHub; these links point at the commit this page was built from.
Lily58 Pro: common questions
How big is the Lily58 Pro PCB?
The Lily58 Pro measures 142.5 × 106.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lily58 Pro?
83 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lily58 Pro design files?
From the Ya3in13/my-Lily58-keyboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Lily58 Pro design in my own project?
The repository has no license, so all rights stay with Ya3in13. Use it as a reference, and ask the author before reusing the design.