Stereo-Decoder-Modul
About the Stereo-Decoder-Modul PCB
Stereo-Decoder-Modul is an open source PCB design by yannickbock, published on GitHub. It is a 2-layer board measuring 95 × 60 mm, with 58 components from 15 distinct parts.
Other key parts include the TCA4500A. By type, the board carries 22 capacitors, 19 resistors, 6 inductors, 4 transformers, 3 connectors and 3 diodes.
Main components on the Stereo-Decoder-Modul
Stereo-Decoder-Modul bill of materials (BOM)
58 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCA4500A | DIP-16_W7.62mm_LongPads | IC901 |
| 1 | CONN_01X13 Conn_01x15 | Connector_01x15_5mm | J1 |
| 1 | 5k | Potentiometer_Piher_PT-10-H01_Horizontal | P901 |
| 1 | 10k | Potentiometer_Piher_PT-10-H01_Horizontal | P911 |
| 4 | BC547 | TO-92_Wide | T904, T907, T921, T941 |
| 3 | D | D_DO-35_SOD27_P5.08mm_Vertical_AnodeUp | D904, D906, D907 |
| 6 | L_Trim | Inductor_Adjustable | L924, L927, L931, L944, L947, L951 |
| 1 | C | R_Axial_DIN0411_L9.9mm_D3.6mm_P5.08mm_Vertical | C901 |
| 3 | C | C_Rect_L7.2mm_W3.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C902, C903, C906 |
| 13 | C | C_Rect_L10.0mm_W3.0mm_P7.50mm_MKS4 | C911, C912, C914, C924, C926, C927, C928, C931 +5 |
| 2 | 4.7µF | C_Rect_L7.2mm_W7.2mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C913, C916 |
| 1 | 220µF | CP_Radial_D8.0mm_P3.50mm | C918 |
| 2 | 22µF | CP_Radial_D5.0mm_P2.00mm | C923, C943 |
| 17 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R901, R903, R904, R907, R908, R913, R916, R917 +9 |
| 2 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R912, R914 |
Stereo-Decoder-Modul design files
The KiCad project lives in the yannickbock/saba repository on GitHub; these links point at the commit this page was built from.
Stereo-Decoder-Modul: common questions
How big is the Stereo-Decoder-Modul PCB?
The Stereo-Decoder-Modul measures 95 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stereo-Decoder-Modul?
58 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stereo-Decoder-Modul design files?
From the yannickbock/saba repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stereo-Decoder-Modul design in my own project?
The repository has no license, so all rights stay with yannickbock. Use it as a reference, and ask the author before reusing the design.
More boards in saba
NF-Grundplatte
252 × 267.5 mm242 parts2LNo license0
HF-Grundplatte
252 × 172.5 mm120 parts2LNo license0
AVR/ArduinoAnzeige-Modul
137 × 102 mm68 parts2LNo license0
Netzteil-Modul
195 × 95 mm65 parts2LNo license0
AM-ZF-Modul
95 × 60 mm65 parts2LNo license0
Klang-Modul
120.5 × 65 mm46 parts2LNo license0
AM-HF-Modul
95 × 70 mm44 parts2LNo license0
Phono-Modul
80 × 57.5 mm43 parts2LNo license0
Treiber-Modul
68.5 × 70 mm38 parts2LNo license0
Präsenz-Modul
68.5 × 70 mm38 parts2LNo license0
Linear-Verstaerker-Modul
68.5 × 70 mm35 parts2LNo license0