HardLabs

Anzeige-Modul

yannickbock·saba·Module/Anzeige-Modul - 9240S/hardware/Anzeige-Modul.kicad_pcb

Anzeige-Modul PCB layout, top view — open source AVR/Arduino board by yannickbock

About the Anzeige-Modul PCB

Anzeige-Modul is an open source AVR/Arduino PCB design by yannickbock, published on GitHub. It is a 2-layer board measuring 137 × 102 mm, with 68 components from 29 distinct parts.

Its main chip is the ATmega328P-AU, from the AVR/Arduino family. Other key parts include the L78L05_SOT89 and 74HC138. By type, the board carries 21 resistors, 13 switches, 13 diodes, 8 capacitors, 7 transistors and 3 ICs.

Main components on the Anzeige-Modul

L78L05_SOT89ATmega328P-AU74HC138

Anzeige-Modul bill of materials (BOM)

68 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
L78L05_SOT89
U1
1
ATmega328P-AU
U2
1
74HC138
U3
7
BC847
Q11, Q21, Q31, Q41, Q51, Q61, Q71
1
CONN_01X13
Conn_01x09_Male
J1
1
Conn_02x03_Counter_Clockwise
J3
1
Conn_01x14_Male
J5
1
AUX
SW1
1
BD1
SW2
1
BD2
SW3
1
PHONO
SW4
1
AM
SW5
1
FM
SW6
1
U1
SW7
1
U2
SW8
1
U3
SW9
1
U4
SW10
1
U5
SW11
1
U6
SW12
1
U
SW13
Show 9 more
QtyPartRefs
6
LED
D11, D21, D31, D41, D51, D61
7
LED
D1248, D1251, D1252, D1253, D1254, D1256, D1257
1
330nF
C1
6
100nF
C2, C4, C5, C6, C7, C8
1
2.2µF
C3
8
1k
R1, R11, R21, R31, R41, R51, R61, R71
6
680
R12, R22, R32, R42, R52, R62
6
100k
R13, R23, R33, R43, R53, R63
1
2k7
R72

Anzeige-Modul design files

The KiCad project lives in the yannickbock/saba repository on GitHub; these links point at the commit this page was built from.

Anzeige-Modul: common questions

What microcontroller does the Anzeige-Modul use?

The Anzeige-Modul is built around the ATmega328P-AU, from the AVR/Arduino family.

How big is the Anzeige-Modul PCB?

The Anzeige-Modul measures 137 × 102 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Anzeige-Modul?

68 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Anzeige-Modul design files?

From the yannickbock/saba repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Anzeige-Modul design in my own project?

The repository has no license, so all rights stay with yannickbock. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Anzeige-Modul without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in saba

Similar boards