Bcg sleep sensor
yashbakka·bcg-sleep-sensor·hardware/kicad/BCG_Sensor_SchematicV1.kicad_sch
About the Bcg sleep sensor PCB
Bcg sleep sensor is an open source PCB design by yashbakka, published on GitHub under the MIT license. It is a board, with 20 components from 14 distinct parts.
Other key parts include the OPA333xxD and MCP6002-xMC. By type, the board carries 8 capacitors, 7 resistors, 2 ICs, 2 diodes and 1 connector.
It belongs with the wearables, sensors and test & measurement designs in this gallery.
From the project
Contactless BCG-based sensor for sleep monitoring. Uses a PVDF piezoelectric film, a charge-amp analog front-end, and a Python DSP pipeline to extract heart rate (HR), respiratory rate (RR), and sleep stage (Wake/REM/Light NREM/Deep NREM) from oscilloscope-captured data.
Status: Heart Rate (HR) has been checked against a reference (Apple Watch, with a built in PPG) on an 18-minute blind sleep test. Autocorrelation on the raw signal matches the watch to within 2 bpm; the template beat detector in this repo still reads about 8 bpm high on the same recording. Respiratory Rate (RR) is robust. Sleep staging works, but is unvalidated as the user was not wearing any smart appliances while sleeping. HRV (RMSSD) was explored in depth, but in spite of multiple approaches and algorithms, I was not able to get accurate HRV readings. This was due to hardware limitations…
Main components on the Bcg sleep sensor
Bcg sleep sensor bill of materials (BOM)
20 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OPA333xxD | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MCP6002-xMC | DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mm | U2 |
| 1 | Conn_01x02 | J1 | |
| 2 | D | D2, D3 | |
| 3 | 100n | C1, C6, C7 | |
| 1 | PVDF SENSOR | C2 | |
| 2 | 10n | C3, C5 | |
| 1 | 820n | C4 | |
| 1 | 10µ | C8 | |
| 2 | 100k | R1, R2 | |
| 1 | 100M | R3 | |
| 2 | 1K | R4, R7 | |
| 1 | 68K | R5 | |
| 1 | 10K | R6 |
Bcg sleep sensor design files
The KiCad project lives in the yashbakka/bcg-sleep-sensor repository on GitHub; these links point at the commit this page was built from.
Bcg sleep sensor: common questions
How many components are on the Bcg sleep sensor?
20 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bcg sleep sensor design files?
From the yashbakka/bcg-sleep-sensor repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Bcg sleep sensor design in my own project?
Yes, under the terms of its MIT license, which yashbakka chose for the repository.
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0k