13 open source boards using the MCP6002-XMC
Real designs built with the MCP6002-XMC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SolarSynth digilog
dusjagr
59.9 × 90 mm29 parts2LCERN-OHL-P-2.08ESP32
In13-Spectrum-Analyser
ImNoahDev
264.2 × 71.1 mm109 parts2LCC-BY-NC-4.03- schematic only · 20 parts
Bcg sleep sensor
yashbakka
20 partsMIT3 STM32
Pdms
PGRacing
102.5 × 113.8 mm473 parts4LNo license1RP2040/RP2350
SumaShield
hugelton
83 × 99 mm83 parts2LMIT1RP2040/RP2350
Kicad preview
siliconvalleyar-oss
98.7 × 99.4 mm368 parts4LNo license0Laser driver v3 Power
scular-HCC
261.3 × 165.2 mm273 parts2LCustom license0ESP32
Stepper synth
udu3324
266.7 × 81 mm182 parts2LGPL-3.00ESP32
Stereo Audio Processing Board
Paa-Kwasi-04
103 × 71.9 mm89 parts2LNo license0ESP32
ESP32-Sensor-Node
Moumne-mo
66.3 × 33.9 mm27 parts2LMIT0ESP32
Iot-Data-Acquisiton-Board
IEEE-VIT
69 × 30.9 mm19 parts2LMIT0Contact Mic Board
jackshisd
31 × 18 mm38 parts4LNo license2STM32
PDM
PGRacing
203.2 × 82.6 mm284 parts2LNo license1
How designs wire the MCP6002-XMC
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the MCP6002-XMC connects to, and the resistors, capacitors and other passives placed on it.
- The + pins have a series resistor on 8 of 11 designs, most often 1.2 kΩ (then 1 kΩ).
- The V- pins is tied to GND on 68% of them (not connected on 4).
- The + pins have a capacitor to GND on 6 of 11 designs, most often 100 nF (then 470 pF).
- The V+ pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| -pin 2, 6 | Connected to: Signal 77% · not connected 18% |
|
| +pin 3, 5 | Connected to: Signal 77% |
|
| V-pin 4, 9 | Connected to: GND 68% · not connected 21% | — |
| V+pin 8 | Connected to: 5V 64% · not connected 18% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SolarSynth digilog by dusjagr, In13-Spectrum-Analyser by ImNoahDev, Contact Mic Board by jackshisd and SumaShield by hugelton.
The MCP6002-XMC in open source designs
The gallery holds 13 open source boards using the MCP6002-XMC from 12 GitHub repositories; a typical one measures about 100.6 × 81.8 mm and carries around 89 components.
75% are two-layer designs, the rest use four layers or more, and 46% carry an open source license.
The most starred is SolarSynth digilog by dusjagr.
Parts used alongside the MCP6002-XMC
Microcontrollers on boards using the MCP6002-XMC
What boards using the MCP6002-XMC are built for
MCP6002-XMC: common questions
Where can I find a MCP6002-XMC reference design?
Each of the 13 boards on this page is a real design using the MCP6002-XMC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MCP6002-XMC + pin?
The + pins have a series resistor on 8 of 11 designs, most often 1.2 kΩ (then 1 kΩ). Counted from the KiCad layouts of 11 open source designs using the MCP6002-XMC.
How is the MCP6002-XMC V- pin connected?
The V- pins is tied to GND on 68% of them (not connected on 4). Counted from the KiCad layouts of 11 open source designs using the MCP6002-XMC.
What decoupling capacitors do designs use on the MCP6002-XMC V+ pin?
The V+ pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the MCP6002-XMC.
What parts are used alongside the MCP6002-XMC?
The ESP32-WROOM-32, AMS1117-3.3, BME280, CH340C and ES8388 appear in the most repositories here.
Which microcontrollers do boards using the MCP6002-XMC use?
Most are built on ESP32 (5), RP2040/RP2350 (2) and STM32 (2).
How big is a typical board using the MCP6002-XMC?
The median is 100.6 × 81.8 mm, and 75% are two-layer designs.
What is the most popular open source board using the MCP6002-XMC?
By GitHub stars, SolarSynth digilog by dusjagr, with 8 stars.
Can I simulate one of these boards using the MCP6002-XMC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.