Yatabaza cpu

ycwn·yatabaza·hardware/cpu/yatabaza-cpu.kicad_pcb

Yatabaza cpu PCB layout, top view — open source STM32 board by ycwn

About the Yatabaza cpu PCB

Yatabaza cpu is an open source STM32 PCB design by ycwn, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 46.4 × 60.3 mm, with 26 components from 21 distinct parts.

Its main chip is the STM32F103 BLUE PILL, from the STM32 family. Other key parts include the 74HCT04 and 6N138. By type, the board carries 10 connectors, 10 resistors, 3 ICs, 2 capacitors and 1 diode.

It belongs with the audio designs in this gallery.

From the project

An 8bit synthesizer based on YM3812

Main components on the Yatabaza cpu

STM32F103 BLUE PILL74HCT046N138

Yatabaza cpu bill of materials (BOM)

26 components, 21 distinct parts.

QtyPartRefs
1
STM32F103 BLUE PILL
U1
1
74HCT04
U2
1
6N138
U3
1
BUS
P3
1
POWER
P4
1
SUPPORT
P5
1
RTC
P7
1
PANEL
P8
1
LD
P9
1
uSD
P10
1
HOST
P11
1
KEYBOARD
P12
1
MIDI
P13
1
1n4148
D1
2
100n
C1, C2
3
10k
R1, R2, R8
2
3k3
R3, R4
1
2k2
R5
1
1k8
R6
1
1k
R7
Show 1 more
QtyPartRefs
2
220
R9, R10

Yatabaza cpu design files

The KiCad project lives in the ycwn/yatabaza repository on GitHub; these links point at the commit this page was built from.

Yatabaza cpu: common questions

What microcontroller does the Yatabaza cpu use?

The Yatabaza cpu is built around the STM32F103 BLUE PILL, from the STM32 family.

How big is the Yatabaza cpu PCB?

The Yatabaza cpu measures 46.4 × 60.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Yatabaza cpu?

26 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Yatabaza cpu design files?

From the ycwn/yatabaza repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Yatabaza cpu design in my own project?

Yes, under the terms of its GPL-3.0 license, which ycwn chose for the repository.

Can I test firmware for the Yatabaza cpu without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in yatabaza

Similar boards