2ch driver v0
YoungerLaboratory·solenoid-driver·2ch-driver-v0/2ch-driver-v0.kicad_pcb
About the 2ch driver v0 PCB
2ch driver v0 is an open source PCB design by YoungerLaboratory, published on GitHub. It is a 2-layer board measuring 76.2 × 38.3 mm, with 38 components from 19 distinct parts.
Other key parts include the DRV104PWP. By type, the board carries 11 resistors, 10 capacitors, 6 diodes, 4 ICs, 4 connectors and 2 transistors.
From the project
Boston University's Younger Lab Solenoid Drivers
Main components on the 2ch driver v0
2ch driver v0 bill of materials (BOM)
38 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DRV104PWP | IC_TPS27S100BPWPR | U1, U3 |
| 1 | ~ | SOT-223-3_TabPin2 | U2 |
| 1 | ~ | SOT-23-5 | U4 |
| 2 | 2N7002E | SOT-23 | Q1, Q2 |
| 1 | Barrel_Jack | BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 3 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J2, J3, J5 |
| 1 | 0ZCF0125FF2C | Fuse_2920_7451Metric | F1 |
| 4 | LED | LED_0805_2012Metric | D1, D2, D4, D5 |
| 2 | PMEG10010ELRX | Nexperia_CFP3_SOD-123W | D3, D6 |
| 1 | 47UF 47uF | CP_EIA-7343-43_Kemet-X_Pad2.25x2.55mm_HandSolder | C1 |
| 2 | 0.18UF 0.18uF | C_0805_2012Metric | C2, C7 |
| 2 | 470PF 470pF | C_0805_2012Metric | C3, C8 |
| 3 | 10UF 10uF | C_1210_3225Metric | C4, C6, C9 |
| 2 | 0.1UF 0.1uF | C_0805_2012Metric | C5, C10 |
| 2 | 1K | R_0805_2012Metric | R1, R7 |
| 1 | 49R9 | R_0805_2012Metric | R2 |
| 4 | 4K7 4k7 | R_0805_2012Metric | R3, R4, R9, R10 |
| 2 | 162K 162k | R_0805_2012Metric | R5, R11 |
| 2 | 191K 191k | R_0805_2012Metric | R6, R12 |
2ch driver v0 design files
The KiCad project lives in the YoungerLaboratory/solenoid-driver repository on GitHub; these links point at the commit this page was built from.
2ch driver v0: common questions
How big is the 2ch driver v0 PCB?
The 2ch driver v0 measures 76.2 × 38.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2ch driver v0?
38 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2ch driver v0 design files?
From the YoungerLaboratory/solenoid-driver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 2ch driver v0 design in my own project?
The repository has no license, so all rights stay with YoungerLaboratory. Use it as a reference, and ask the author before reusing the design.