Driver v0
YoungerLaboratory·solenoid-driver·driver-v0/driver-v0.kicad_pcb
About the Driver v0 PCB
Driver v0 is an open source PCB design by YoungerLaboratory, published on GitHub. It is a 2-layer board measuring 45 × 40 mm, with 16 components from 16 distinct parts.
Other key parts include the DRV104PWP. By type, the board carries 5 resistors, 4 capacitors, 3 connectors, 2 diodes, 1 IC and 1 fuse.
From the project
Boston University's Younger Lab Solenoid Drivers
Main components on the Driver v0
Driver v0 bill of materials (BOM)
16 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV104PWP | IC_TPS27S100BPWPR | U1 |
| 1 | PJ-063AH Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | TBL009-254-16GY-2GY Barrel_Jack | BarrelJack_CUI_PJ-063AH_Horizontal | J3 |
| 1 | 0ZCF0125FF2C | Fuse_2920_7451Metric | F1 |
| 1 | PMEG10010ELRX LED | LED_0805_2012Metric | D1 |
| 1 | PMEG10010ELRX | Nexperia_CFP3_SOD-123W | D2 |
| 1 | 47UF 47uF | CP_EIA-7343-43_Kemet-X_Pad2.25x2.55mm_HandSolder | C1 |
| 1 | 0.18UF 10uF | C_1210_3225Metric | C3 |
| 1 | 470PF 0.18uF | C_0805_2012Metric | C4 |
| 1 | 10UF 470pF | C_0805_2012Metric | C5 |
| 1 | 4K7 49R9 | R_0805_2012Metric | R1 |
| 1 | 162K 191k | R_0805_2012Metric | R2 |
| 1 | 49R9 162k | R_0805_2012Metric | R3 |
| 1 | 4K7 4k7 | R_0805_2012Metric | R4 |
| 1 | 191K 4k7 | R_0805_2012Metric | R5 |
Driver v0 design files
The KiCad project lives in the YoungerLaboratory/solenoid-driver repository on GitHub; these links point at the commit this page was built from.
Driver v0: common questions
How big is the Driver v0 PCB?
The Driver v0 measures 45 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Driver v0?
16 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Driver v0 design files?
From the YoungerLaboratory/solenoid-driver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Driver v0 design in my own project?
The repository has no license, so all rights stay with YoungerLaboratory. Use it as a reference, and ask the author before reusing the design.