InkDeck

Yourm5m5·InkDeck·PCB/Inkdeck.kicad_pcb

InkDeck PCB layout, top view — open source board by Yourm5m5

About the InkDeck PCB

InkDeck is an open source PCB design by Yourm5m5, published on GitHub. It is a 2-layer board measuring 25 × 67 mm, with 13 components from 12 distinct parts.

By type, the board carries 4 switches, 3 connectors, 3 resistors, 1 module, 1 transistor and 1 diode.

It belongs with the power & battery, iot & wireless and displays & leds designs in this gallery.

From the project

A pocket e-paper e-reader with physical page-turn buttons, weeks of battery life, and books loaded over Wi-Fi.

A pocket e-paper e-reader with physical page-turn buttons, weeks of battery life, and books loaded over Wi-Fi.

InkDeck is a DIY e-reader about the size of a paperback (153 × 72 × 23.5 mm). It has a 4.7" e-paper screen that looks like printed paper, so it's easy on the eyes and readable in sunlight, and it keeps the page on screen even with the power off.

It's built around a LilyGo T5 4.7" E-Paper S3 board (ESP32-S3 + 960 × 540 e-paper + microSD slot), plus a custom grip PCB I designed in KiCad. The grip board sits beside the screen under your right thumb and has:

InkDeck, from the project README
From the project README

InkDeck bill of materials (BOM)

13 components, 12 distinct parts.

QtyPartRefs
1
Vibration motor
M1
1
AO3400
Q1
1
BAT IN
J1
1
BAT OUT
J2
1
LilyGo
J3
1
SW_SPDT
SW1
1
PREV
SW3
1
NEXT
SW4
1
MENU
SW5
1
1N4148
D1
2
10K
R1, R3
1
100
R2

InkDeck design files

The KiCad project lives in the Yourm5m5/InkDeck repository on GitHub; these links point at the commit this page was built from.

InkDeck: common questions

How big is the InkDeck PCB?

The InkDeck measures 25 × 67 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the InkDeck?

13 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the InkDeck design files?

From the Yourm5m5/InkDeck repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the InkDeck design in my own project?

The repository has no license, so all rights stay with Yourm5m5. Use it as a reference, and ask the author before reusing the design.

Similar boards