Sdi12-adapter
z4ika·sdi12-adapter
About the Sdi12-adapter PCB
Sdi12-adapter is an open source STM32 PCB design by z4ika, published on GitHub under the AGPL-3.0 license. It is a 4-layer board measuring 52.5 × 30.3 mm, with 37 components from 24 distinct parts.
Its main chip is the STM32G431CBUx, from the STM32 family. Other key parts include the LDI1117-3.3H and TXS0102DCT. By type, the board carries 14 capacitors, 9 resistors, 5 connectors, 4 diodes, 3 ICs and 1 crystal.
From the project
STM32F103CBT6 based SDI-12 to USB2.0 adapter board
Current revision includes bidirectional 5V - 3.3V level shifting without logical voltage level inversion. This ensures compability of SDI standard with TTL logic. All of the parts have been standarized and designated manufacturer is JLCPCB. Project includes index.html as BOM listing.

Main components on the Sdi12-adapter
Sdi12-adapter bill of materials (BOM)
37 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LDI1117-3.3H | SOT-223-3_TabPin2 | U1 |
| 1 | STM32G431CBUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 1 | TXS0102DCT | SSOP-8_2.95x2.8mm_P0.65mm | U5 |
| 1 | 24MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | Conn_SWD | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | SDI-12_OUT | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J3 |
| 1 | SDI12_POWER | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J4 |
| 1 | BOOTSEL | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | RESET | SW_SPST_B3U-1000P | SW2 |
| 1 | RED_LED | LED_0805_2012Metric | D1 |
| 1 | MM3Zxx | D_SOD-323F | D2 |
| 1 | USER_LED | LED_0805_2012Metric | D3 |
| 1 | USER_LED_2 | LED_0805_2012Metric | D4 |
| 4 | 1uF | C_0805_2012Metric | C1, C2, C6, C8 |
| 7 | 100nF | C_0603_1608Metric | C3, C4, C5, C7, C12, C14, C15 |
| 2 | 12pF | C_0603_1608Metric | C9, C10 |
| 1 | 22nF | C_0603_1608Metric | C11 |
| 3 | xkΩ | R_0603_1608Metric | R1, R6, R10 |
| 1 | 1.5kΩ | R_0603_1608Metric | R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2.2kΩ | R_0603_1608Metric | R3 |
| 1 | DNP | R_0603_1608Metric | R4 |
| 2 | 510Ω | R_0603_1608Metric | R7, R9 |
| 1 | 200kΩ | R_0603_1608Metric | R8 |
Sdi12-adapter design files
The KiCad project lives in the z4ika/sdi12-adapter repository on GitHub; these links point at the commit this page was built from.
- LayoutSDI-12.kicad_pcb
- SchematicSDI-12.kicad_sch
Sdi12-adapter: common questions
What microcontroller does the Sdi12-adapter use?
The Sdi12-adapter is built around the STM32G431CBUx, from the STM32 family.
How big is the Sdi12-adapter PCB?
The Sdi12-adapter measures 52.5 × 30.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Sdi12-adapter?
37 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sdi12-adapter design files?
From the z4ika/sdi12-adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sdi12-adapter design in my own project?
Yes, under the terms of its AGPL-3.0 license, which z4ika chose for the repository.
Can I test firmware for the Sdi12-adapter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k