CcTalkAdapter
Zarathos94·ccTalkAdapter
About the CcTalkAdapter PCB
CcTalkAdapter is an open source PCB design by Zarathos94, published on GitHub. It is a 2-layer board measuring 60 × 40 mm, with 23 components from 19 distinct parts.
Other key parts include the MCP2221AXSL. By type, the board carries 7 resistors, 6 capacitors, 3 connectors, 3 diodes, 2 transistors and 1 IC.
From the project
A HW project - A conversion board for the old CCTalk protocol, used by old slot machines and retail automation platforms
This is a Genesys ccTalk Adapter made for a specific integration for old coin operated machines. Includes BOM and is JLCPCB compatible and ready for prototyping.
It's a simple adapter that allows you to connect a ccTalk device to a modern computer via USB via 12v and USB power. Just forwards the ccTalk protocol, which is a single wire protocol, so it's very simple and easy to implement.

Main components on the CcTalkAdapter
CcTalkAdapter bill of materials (BOM)
23 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2221AXSL MCP2221AxSL | MCP2221-I_ST | U1 |
| 1 | BC847 | SOT-23 | Q1 |
| 1 | BC856 | SOT-23 | Q2 |
| 1 | USB_A | USB_A_CONNFLY_DS1095-WNR0 | J1 |
| 1 | Debug-Connector | PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | Hopper-Connector | PinHeader_1x10_P2.54mm_Horizontal | J3 |
| 1 | UA78M05CDCYR | VREG_UA78M05CDCYR | VR1 |
| 1 | Power LED | LED_0201_0603Metric_Pad0.64x0.40mm_HandSolder | D1 |
| 1 | BAT54J | D_SOD-323F | D2 |
| 1 | BAT760-7 | SOD2513X120N | D3 |
| 1 | 0.33UF 0.33uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 470NF 470nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 1UF 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 2 | 100NF 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6 |
| 1 | 10UF 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 4 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R5, R6 |
| 1 | 330R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 56R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 100K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
CcTalkAdapter design files
The KiCad project lives in the Zarathos94/ccTalkAdapter repository on GitHub; these links point at the commit this page was built from.
CcTalkAdapter: common questions
How big is the CcTalkAdapter PCB?
The CcTalkAdapter measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CcTalkAdapter?
23 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CcTalkAdapter design files?
From the Zarathos94/ccTalkAdapter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CcTalkAdapter design in my own project?
The repository has no license, so all rights stay with Zarathos94. Use it as a reference, and ask the author before reusing the design.