8 open source boards using the MCP2221AxSL
Real designs built with the MCP2221AxSL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Nixiedisp
jtsiomb
140 × 76.1 mm224 parts2LGPL-3.03ESP32
Reflectometer
FynnK
100 × 100 mm70 parts4LNo license0Mcp breadboard
HarkonenBade
48.3 × 35.6 mm25 parts2LMIT0CcTalkAdapter
Zarathos94
60 × 40 mm23 parts2LNo license0Fat8
jkearneyma
75 × 45 mm22 parts2LBSD-3-Clause0BridgeReplacementBoard
KerJoe
10.7 × 16.8 mm18 parts2LNo license23Lsw5-esp32-test jig
mwdmwd
53.8 × 100 mm21 parts2LNo license2Usb int
M-o-a-T
46.9 × 17.4 mm41 parts4LNo license0
How designs wire the MCP2221AxSL
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the MCP2221AxSL connects to, and the resistors, capacitors and other passives placed on it.
- The RST pin has a pull-up to 5V on 6 of 8 designs, most often 10 kΩ.
- The VUSB pin has a capacitor to GND on 6 of 8 designs, most often 100 nF (then 470 nF).
- The VDD pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: VCC 88% |
|
| GP0pin 2 | Connected to: Signal 63% · not connected 38% |
|
| RSTpin 4 | Connected to: Signal 88% |
|
| VUSBpin 11 | Connected to: Signal 75% · VBUS 25% |
|
| VSSpin 14 | Connected to: GND 88% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BridgeReplacementBoard by KerJoe, Nixiedisp by jtsiomb, Lsw5-esp32-test jig by mwdmwd and Reflectometer by FynnK.
The MCP2221AxSL in open source designs
The gallery holds 8 open source boards using the MCP2221AxSL from 8 GitHub repositories; a typical one measures about 56.9 × 42.5 mm and carries around 24 components.
75% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is BridgeReplacementBoard by KerJoe.
Microcontrollers on boards using the MCP2221AxSL
What boards using the MCP2221AxSL are built for
MCP2221AxSL: common questions
Where can I find a MCP2221AxSL reference design?
Each of the 8 boards on this page is a real design using the MCP2221AxSL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the MCP2221AxSL RST pin?
The RST pin has a pull-up to 5V on 6 of 8 designs, most often 10 kΩ. Counted from the KiCad layouts of 8 open source designs using the MCP2221AxSL.
How is the MCP2221AxSL VUSB pin connected?
The VUSB pin has a capacitor to GND on 6 of 8 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 8 open source designs using the MCP2221AxSL.
What decoupling capacitors do designs use on the MCP2221AxSL VDD pin?
The VDD pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the MCP2221AxSL.
Which microcontrollers do boards using the MCP2221AxSL use?
Most are built on AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the MCP2221AxSL?
The median is 56.9 × 42.5 mm, and 75% are two-layer designs.
What is the most popular open source board using the MCP2221AxSL?
By GitHub stars, BridgeReplacementBoard by KerJoe, with 23 stars.
Can I simulate one of these boards using the MCP2221AxSL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.