Stm32-devboard

ZegesMenden·stm32-devboard

Stm32-devboard PCB layout, top view — open source STM32 board by ZegesMenden

About the Stm32-devboard PCB

Stm32-devboard is an open source STM32 PCB design by ZegesMenden, published on GitHub. It is a 2-layer board measuring 25.9 × 51.3 mm, with 22 components from 15 distinct parts.

Its main chip is the STM32G473CCUX, from the STM32 family. Other key parts include the AZ1117-3.3. By type, the board carries 13 capacitors, 3 connectors, 2 ICs, 2 crystals and 2 resistors.

It belongs with the dev boards & breakouts designs in this gallery.

Main components on the Stm32-devboard

Stm32-devboard bill of materials (BOM)

22 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G473CCUX
STM32G473CCUx
U1
1
AZ1117-3.3
U2
1
X322524MSB4SI
Y1
1
X161032768KJD2SI
Y2
1
CONN_01X04_PIN
Conn_01x04_Pin
J1
2
CONN_01X20_PIN
Conn_01x20_Pin
J2, J3
5
100N
100n
C1, C2, C3, C4, C5
2
30P
30p
C6, C7
1
1u
C8
2
4p
C9, C10
1
22UF
22uF
C11
1
10U
10u
C12
1
10UF
10uF
C13
1
10K
10k
R1
1
220
R2

Stm32-devboard design files

The KiCad project lives in the ZegesMenden/stm32-devboard repository on GitHub; these links point at the commit this page was built from.

Stm32-devboard: common questions

What microcontroller does the Stm32-devboard use?

The Stm32-devboard is built around the STM32G473CCUX, from the STM32 family.

How big is the Stm32-devboard PCB?

The Stm32-devboard measures 25.9 × 51.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stm32-devboard?

22 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stm32-devboard design files?

From the ZegesMenden/stm32-devboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Stm32-devboard design in my own project?

The repository has no license, so all rights stay with ZegesMenden. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stm32-devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards