HardLabs

Ferris sweep ec bottom plate

zwang695·ferris-sweep-ec·mechanical/bottom-plate/ferris-sweep-ec-bottom-plate.kicad_pcb

Ferris sweep ec bottom plate PCB layout, top view — open source AVR/Arduino board by zwang695

About the Ferris sweep ec bottom plate PCB

Ferris sweep ec bottom plate is an open source AVR/Arduino PCB design by zwang695, published on GitHub. It is a 2-layer board measuring 114 × 97.8 mm, with 6 components from 4 distinct parts.

Its main chip is the STeMCell, from the AVR/Arduino family. By type, the board carries 1 IC and 1 connector.

From the project

This directory will contain canonical key coordinates, PCB outline sources, the Topre/OEM plate, and stack drawings. Sweep geometry is a layout input; EC housing cutouts and compression dimensions come from the proven reference and selected Topre-compatible physical parts.

This directory will contain canonical key coordinates, PCB outline sources, the Topre/OEM plate, and stack drawings. Sweep geometry is a layout input; EC housing cutouts and compression dimensions come from the proven reference and selected Topre-compatible physical parts.

Revision A uses a 1.2 mm nominal plate. NiZ compatibility and its separate plate stack are out of scope.

Main components on the Ferris sweep ec bottom plate

STeMCell

Ferris sweep ec bottom plate bill of materials (BOM)

6 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STeMCell
U1
1
PJ-320A
MJ-4PP-9
SOFNG
J1
1
nice!view
DISP1
3
MountingHole
H15, H16, H17

Ferris sweep ec bottom plate design files

The KiCad project lives in the zwang695/ferris-sweep-ec repository on GitHub; these links point at the commit this page was built from.

Ferris sweep ec bottom plate: common questions

What microcontroller does the Ferris sweep ec bottom plate use?

The Ferris sweep ec bottom plate is built around the STeMCell, from the AVR/Arduino family.

How big is the Ferris sweep ec bottom plate PCB?

The Ferris sweep ec bottom plate measures 114 × 97.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ferris sweep ec bottom plate?

6 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ferris sweep ec bottom plate design files?

From the zwang695/ferris-sweep-ec repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Ferris sweep ec bottom plate design in my own project?

The repository has no license, so all rights stay with zwang695. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ferris sweep ec bottom plate without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in ferris-sweep-ec

Similar boards