YetAnotherUSBHub
About the YetAnotherUSBHub PCB
YetAnotherUSBHub is an open source PCB design by 0x62b, published on GitHub. It is a 2-layer board measuring 77.6 × 32.6 mm, with 28 components from 14 distinct parts.
Other key parts include the GL823K-HCY04, TPD6F003 and TPD2E2U06DCK. By type, the board carries 9 capacitors, 7 ICs, 5 connectors, 5 resistors and 2 diodes.
From the project
1. Mark out the dimensions of the acrylic window and use a scoring tool to cut it 2. From the sides, glue the acrylic window into the top case 3. Wait for glue to set 4. Place completed PCB into bottom case (optionally, affix it with double sided tape, but it should be held in pl
1. Mark out the dimensions of the acrylic window and use a scoring tool to cut it 2. From the sides, glue the acrylic window into the top case 3. Wait for glue to set 4. Place completed PCB into bottom case (optionally, affix it with double sided tape, but it should be held in place by friction anyway 5. Glue the top half onto bottom half (I tried, with this kind of size its not very feasible to use screws or anything)
Main components on the YetAnotherUSBHub
YetAnotherUSBHub bill of materials (BOM)
28 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | SOP-16_L10.0-W3.9-P1.27-LS6.0-BL | U1 |
| 1 | GL823K-HCY04 GENESYS(创惟) | SSOP-16_L4.9-W3.9-P0.64-LS6.0-BL | U2 |
| 1 | TPD6F003 | Texas_R-PWSON-N12_EP0.4x2mm | U3 |
| 4 | TPD2E2U06DCK | SOT-323_SC-70 | U4, U5, U6, U7 |
| 2 | USB_A | USB_A_Molex_67643_Horizontal | J1, J2 |
| 1 | Micro_SD_Card | microSD_HC_Molex_104031-0811 | J3 |
| 2 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J4, J5 |
| 1 | D | D_SOD-323 | D1 |
| 1 | LED | LED_0402_1005Metric | D2 |
| 7 | 10uF | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C10 |
| 2 | 0.1uF | C_0402_1005Metric | C8, C9 |
| 2 | 5.1K | R_0402_1005Metric | R1, R2 |
| 2 | 56K | R_0402_1005Metric | R3, R4 |
| 1 | 1K | R_0402_1005Metric | R5 |
YetAnotherUSBHub design files
The KiCad project lives in the 0x62b/YetAnotherUSBHub repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/YetAnotherUSBHub.kicad_pcb
- Schematicpcb/YetAnotherUSBHub.kicad_sch
- BOMbom.csv
YetAnotherUSBHub: common questions
How big is the YetAnotherUSBHub PCB?
The YetAnotherUSBHub measures 77.6 × 32.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the YetAnotherUSBHub?
28 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the YetAnotherUSBHub design files?
From the 0x62b/YetAnotherUSBHub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the YetAnotherUSBHub design in my own project?
The repository has no license, so all rights stay with 0x62b. Use it as a reference, and ask the author before reusing the design.