13 open source boards using the GL823K-HCY04

Real designs built with the GL823K-HCY04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the GL823K-HCY04

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the GL823K-HCY04 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 10 µF).
  • The VDDA pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 1 µF).
  • The PMOS pin has a capacitor to GND on 10 of 12 designs, most often 100 nF (then 10 µF).
  • The 5V pin is tied to 5V on 10 of 12 designs.
VSSpin 1, 14Connected to: GND 100%
PMOSpin 8Connected to: A connector 42%
  • Capacitor to GND on 83% · 100 nF (5), 10 µF (4), 47 µF (1)
VDDpin 9Connected to: 3.3V 67% · a signal 25%
  • Decoupling capacitor on 92% · 100 nF (9), 10 µF (4), 1 µF (3)
5Vpin 10Connected to: 5V 83%
GPIOpin 11Connected to: Not connected 67% · a signal 25%
VDDApin 13Connected to: 3.3V 58% · a signal 33%
  • Decoupling capacitor on 92% · 100 nF (11), 1 µF (3), 10 µF (3)

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MIG Dumper by sabogalc, BedCooler by NicholasKorth, MainPCB by HelloAlex4 and Expresscard to nvme by ambraglow.

The GL823K-HCY04 in open source designs

The gallery holds 13 open source boards using the GL823K-HCY04 from 12 GitHub repositories; a typical one measures about 60 × 60 mm and carries around 69 components.

62% use four copper layers or more, and 38% carry an open source license.

The most starred is MIG Dumper by sabogalc.

Parts used alongside the GL823K-HCY04

Microcontrollers on boards using the GL823K-HCY04

What boards using the GL823K-HCY04 are built for

GL823K-HCY04: common questions

Where can I find a GL823K-HCY04 reference design?

Each of the 13 boards on this page is a real design using the GL823K-HCY04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the GL823K-HCY04 VDD pin?

The VDD pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 12 open source designs using the GL823K-HCY04.

What decoupling capacitors do designs use on the GL823K-HCY04 VDDA pin?

The VDDA pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the GL823K-HCY04.

How is the GL823K-HCY04 PMOS pin connected?

The PMOS pin has a capacitor to GND on 10 of 12 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 12 open source designs using the GL823K-HCY04.

Which microcontrollers do boards using the GL823K-HCY04 use?

Most are built on STM32 (2), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the GL823K-HCY04?

The median is 60 × 60 mm, and 38% are two-layer designs.

What is the most popular open source board using the GL823K-HCY04?

By GitHub stars, MIG Dumper by sabogalc, with 64 stars.

Can I simulate one of these boards using the GL823K-HCY04 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part