13 open source boards using the TPD2E2U06DCK

Real designs built with the TPD2E2U06DCK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the TPD2E2U06DCK

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPD2E2U06DCK connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 3 is tied to GND on 6 of 6 designs.
Pin 1Connected to: A connector 100%
  • Series resistor on 33% · 0 Ω (1), 22 Ω (1)
Pin 2Connected to: A connector 100%
  • Series resistor on 33% · 0 Ω (1), 22 Ω (1)
Pin 3Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SparkAltBatteryBoard by fahreddinaykut, Comms by melair, UPIC46 by emertcakir and Travel router by 0x62b.

The TPD2E2U06DCK in open source designs

The gallery holds 13 open source boards using the TPD2E2U06DCK from 8 GitHub repositories; a typical one measures about 73.4 × 49 mm and carries around 40 components.

62% are two-layer designs, the rest use four layers or more, and 23% carry an open source license.

The most starred is SparkAltBatteryBoard by fahreddinaykut.

Microcontrollers on boards using the TPD2E2U06DCK

TPD2E2U06DCK: common questions

Where can I find a TPD2E2U06DCK reference design?

Each of the 13 boards on this page is a real design using the TPD2E2U06DCK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPD2E2U06DCK pin 3 connected?

Pin 3 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the TPD2E2U06DCK.

Which microcontrollers do boards using the TPD2E2U06DCK use?

Most are built on STM32 (5), ESP32 (2), AVR/Arduino (1) and PIC (1).

How big is a typical board using the TPD2E2U06DCK?

The median is 73.4 × 49 mm, and 62% are two-layer designs.

What is the most popular open source board using the TPD2E2U06DCK?

By GitHub stars, SparkAltBatteryBoard by fahreddinaykut, with 20 stars.

Can I simulate one of these boards using the TPD2E2U06DCK before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part