STM32F072-Custom-Mechanical-Keyboard
12Robert20·STM32F072-Custom-Mechanical-Keyboard
About the STM32F072-Custom-Mechanical-Keyboard PCB
STM32F072-Custom-Mechanical-Keyboard is an open source STM32 PCB design by 12Robert20, published on GitHub. It is a 2-layer board measuring 375 × 138.1 mm, with 201 components from 14 distinct parts.
Its main chip is the STM32F072CBUx, from the STM32 family. Other key parts include the AP2112K-3.3 and USBLC6-2SC6. By type, the board carries 90 diodes, 89 switches, 9 capacitors, 8 resistors, 3 ICs and 2 connectors.
It belongs with the keyboards designs in this gallery.
From the project
Hardware design files for a custom mechanical keyboard PCB powered by STM32F072 (crystal-less USB), featuring a 6x17 matrix, USB Type-C, USBLC6-2 ESD protection, and status LEDs in KiCad.
A custom hardware controller and switch matrix PCB designed in KiCad, powered by the STMicroelectronics STM32F072CBU6 microcontroller. Built for standard ANSI/ISO mechanical keyboard configurations with full N-Key Rollover (NKRO), native USB Type-C connectivity, and hardware-level ESD protection.
This project implements a self-contained mechanical keyboard controller and matrix layout. The architecture was developed to prioritize reliability, low Bill-of-Materials (BOM) complexity, and robust electrical protection without requiring external crystals or SPI flash memories.
Main components on the STM32F072-Custom-Mechanical-Keyboard
STM32F072-Custom-Mechanical-Keyboard bill of materials (BOM)
201 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072CBUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | Conn_01x04_Pin | SolderingWirePad_1x04_SMD_2x4mm | J2 |
| 2 | SW_MEC_5G | SW_MEC_5GSH9 | SW1, SW2 |
| 87 | SW_Push_45deg | SW_Cherry_MX_1.50u_Plate | SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10 +79 |
| 3 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D108 |
| 87 | D_Small_Filled | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D4, D5, D6, D7, D8, D9, D10 +79 |
| 3 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C7, C8 |
| 6 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C5, C6, C9 |
| 3 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R6 |
| 3 | 200R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5 |
| 2 | 5k1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
STM32F072-Custom-Mechanical-Keyboard design files
The KiCad project lives in the 12Robert20/STM32F072-Custom-Mechanical-Keyboard repository on GitHub; these links point at the commit this page was built from.
STM32F072-Custom-Mechanical-Keyboard: common questions
What microcontroller does the STM32F072-Custom-Mechanical-Keyboard use?
The STM32F072-Custom-Mechanical-Keyboard is built around the STM32F072CBUx, from the STM32 family.
How big is the STM32F072-Custom-Mechanical-Keyboard PCB?
The STM32F072-Custom-Mechanical-Keyboard measures 375 × 138.1 mm, has 2 copper layers and is 1.51 mm thick.
How many components are on the STM32F072-Custom-Mechanical-Keyboard?
201 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32F072-Custom-Mechanical-Keyboard design files?
From the 12Robert20/STM32F072-Custom-Mechanical-Keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32F072-Custom-Mechanical-Keyboard design in my own project?
The repository has no license, so all rights stay with 12Robert20. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F072-Custom-Mechanical-Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k