8 open source boards using the STM32F072CBUx
Real designs built with the STM32F072CBUx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Otter-Iron
Jana-Marie
84 × 10 mm63 parts4LGPL-3.0520STM32
TurboCAN
henrikssn
43 × 43 mm84 parts2LNo license82STM32
NOGGIN
berkeleyauv
31.3 × 34 mm57 parts4LGPL-3.03STM32
STM32F072-Custom-Mechanical-Keyboard
12Robert20
375 × 138.1 mm201 parts2LNo license0STM32
Korris
yanghu
264 × 87.1 mm126 parts2LMIT63STM32
Numbpad
calvin-mcd
76 × 76.5 mm33 parts4LCC-BY-NC-4.016STM32
ESCC
berkeleyauv
36 × 40 mm28 parts2LGPL-3.03STM32
Noggin f072cb
berkeleyauv
59 × 25.9 mm26 parts2LGPL-3.03
How designs wire the STM32F072CBUx
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32F072CBUx connects to, and the resistors, capacitors and other passives placed on it.
- The VBAT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The BOOT0 pin has a resistor to GND on 6 of 6 designs, most often 10 kΩ (then 2.37 kΩ).
- The VDDA pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 100% |
|
| PC13pin 2 | Connected to: Not connected 67% · a signal 33% | — |
| PC14pin 3 | Connected to: Not connected 67% · a signal 33% | — |
| PC15pin 4 | Connected to: Not connected 83% · a signal 17% | — |
| PF1pin 6 | Connected to: Not connected 83% · a signal 17% | — |
| NRSTpin 7 | Connected to: A connector 50% |
|
| VSSApin 8 | Connected to: GND 100% | — |
| VDDApin 9 | Connected to: 3.3V 100% |
|
| PA0pin 10 | Connected to: Not connected 50% · a signal 50% |
|
| PA3pin 13 | Connected to: Signal 67% · not connected 33% |
|
| PB0pin 18 | Connected to: Not connected 67% · a signal 33% | — |
| PB1pin 19 | Connected to: Not connected 67% · a signal 33% | — |
| PB2pin 20 | Connected to: Not connected 67% · a signal 33% | — |
| PB11pin 22 | Connected to: Signal 83% · not connected 17% |
|
| VSSpin 23, 35, 47, 49 | Connected to: GND 100% | — |
| VDDpin 24, 48 | Connected to: 3.3V 100% |
|
| PB14pin 27 | Connected to: Not connected 67% · a signal 33% | — |
| PB15pin 28 | Connected to: Not connected 67% · a signal 33% | — |
| PA8pin 29 | Connected to: Signal 67% · not connected 33% |
|
| VDDIO2pin 36 | Connected to: 3.3V 100% |
|
| PA15pin 38 | Connected to: Not connected 83% · a signal 17% | — |
| PB3pin 39 | Connected to: Not connected 67% · a signal 33% | — |
| PB6pin 42 | Connected to: Signal 67% · not connected 33% |
|
| PB7pin 43 | Connected to: Signal 67% · not connected 33% |
|
| BOOT0pin 44 | Connected to: A connector 33% |
|
| PB8pin 45 | Connected to: Not connected 67% · a signal 33% | — |
| PB9pin 46 | Connected to: Not connected 67% · a signal 33% | — |
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Otter-Iron by Jana-Marie, TurboCAN by henrikssn, Korris by yanghu and Numbpad by calvin-mcd.
The STM32F072CBUx in open source designs
The gallery holds 8 open source boards using the STM32F072CBUx from 6 GitHub repositories; a typical one measures about 67.5 × 41.5 mm and carries around 60 components.
63% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Otter-Iron by Jana-Marie.
Parts used alongside the STM32F072CBUx
Microcontrollers on boards using the STM32F072CBUx
What boards using the STM32F072CBUx are built for
STM32F072CBUx: common questions
Where can I find a STM32F072CBUx reference design?
Each of the 8 boards on this page is a real design using the STM32F072CBUx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32F072CBUx VBAT pin?
The VBAT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32F072CBUx.
What decoupling capacitors do designs use on the STM32F072CBUx VDD pin?
The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32F072CBUx.
What resistor goes on the STM32F072CBUx BOOT0 pin?
The BOOT0 pin has a resistor to GND on 6 of 6 designs, most often 10 kΩ (then 2.37 kΩ). Counted from the KiCad layouts of 6 open source designs using the STM32F072CBUx.
Which microcontrollers do boards using the STM32F072CBUx use?
Most are built on STM32 (8).
How big is a typical board using the STM32F072CBUx?
The median is 67.5 × 41.5 mm, and 63% are two-layer designs.
What is the most popular open source board using the STM32F072CBUx?
By GitHub stars, Otter-Iron by Jana-Marie, with 520 stars.
Can I simulate one of these boards using the STM32F072CBUx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.