Pcb design
3sculape·pcb-design·keyboard/keyboard.kicad_pcb
About the Pcb design
Pcb design is an open source STM32 PCB design by 3sculape, published on GitHub. It is a 2-layer board measuring 228.6 × 79.8 mm, with 116 components from 18 distinct parts.
Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the USBLC6-2P6 and AMS1117-3.3. By type, the board carries 49 switches, 47 diodes, 11 capacitors, 3 ICs, 3 resistors and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
Collection of PCB design for personal projects
Main components on the Pcb design
Pcb design bill of materials (BOM)
116 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2P6 | SOT-666 | U1 |
| 1 | STM32F072CBT6 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | 500m | Fuse_0603_1608Metric | F1 |
| 47 | Keyswitch | SW_Hotswap_Kailh_MX | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +39 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW49 |
| 1 | SW_Push | SW_SPST_SKQG_WithStem | SW50 |
| 47 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +39 |
| 1 | FerriteBead | L_0603_1608Metric | FB1 |
| 5 | 100n | C_0603_1608Metric | C0, C5, C6, C7, C8 |
| 1 | 10u | C_0603_1608Metric | C1 |
| 1 | 22u | C_0603_1608Metric | C3 |
| 1 | 4u7 | C_0603_1608Metric | C4 |
| 2 | 10n | C_0603_1608Metric | C9, C10 |
| 1 | 1u | C_0603_1608Metric | C11 |
| 2 | 5k1 | R_0603_1608Metric | R1, R2 |
| 1 | 10k | R_0603_1608Metric | R3 |
Pcb design design files
The KiCad project lives in the 3sculape/pcb-design repository on GitHub; these links point at the commit this page was built from.
- Layoutkeyboard/keyboard.kicad_pcb
- Schematickeyboard/keyboard.kicad_sch
Pcb design: common questions
What microcontroller does the Pcb design use?
The Pcb design is built around the STM32F072CBT6, from the STM32 family.
How big is the Pcb design?
The Pcb design measures 228.6 × 79.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pcb design?
116 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcb design design files?
From the 3sculape/pcb-design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pcb design design in my own project?
The repository has no license, so all rights stay with 3sculape. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pcb design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k