PCM270-DAC
411568·PCM270-DAC·PMC270_DAC/PMC270_DAC.kicad_pcb
About the PCM270-DAC PCB
PCM270-DAC is an open source PCB design by 411568, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 26 mm, with 31 components from 13 distinct parts.
Other key parts include the USBLC6-2SC6 and PCM2704CDBR. By type, the board carries 16 resistors, 12 capacitors, 2 ICs and 1 crystal.
From the project
PCM270xC based USB DAC with line out
USB DAC based on the PCM270xC iC. Powered by a USB type C connector. Output is compliant with the Line Out specification. The included gerber files and BOM are made for JLCPCB. All of the components are taken from the LCSC library, meaning you can have the board assembled by JLC. Important note: the board has not been tested yet.
This project is licensed under the MIT License.

Main components on the PCM270-DAC
PCM270-DAC bill of materials (BOM)
31 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | PCM2704CDBR | SOP65P780X200-28N | U2 |
| 1 | C14871 | XTAL1170X500X450 | Y1 |
| 5 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5, C6, C9, C10 |
| 2 | 12P 12p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 1 | 10U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 2 | 22N 22n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8 |
| 2 | 100U 100u | C_Elec_6.3x7.7 | C11, C12 |
| 9 | 5.1K 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R6, R7, R8, R9, R10, R11 +1 |
| 1 | 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 2 | 22 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 16 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14 |
| 2 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16 |
PCM270-DAC design files
The KiCad project lives in the 411568/PCM270-DAC repository on GitHub; these links point at the commit this page was built from.
PCM270-DAC: common questions
How big is the PCM270-DAC PCB?
The PCM270-DAC measures 65 × 26 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCM270-DAC?
31 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PCM270-DAC design files?
From the 411568/PCM270-DAC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PCM270-DAC design in my own project?
Yes, under the terms of its MIT license, which 411568 chose for the repository.