Phone transceiver digital modes interface
About the Phone transceiver digital modes interface PCB
Phone transceiver digital modes interface is an open source PCB design by 4x1md, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 50 mm, with 33 components from 22 distinct parts.
By type, the board carries 15 resistors, 10 capacitors, 3 connectors, 2 transistors, 2 diodes and 1 switch.
It belongs with the rf & radio designs in this gallery.
From the project
AFSK interface for Android smartphones and tablets.
This interface board was designed for experimenting with RTTY, SSTV and other digital modes with my Yaesu FT-817ND transceiver using DroidRTTY and DroidSSTV applications on an Android phone.
The idea of this circuit is not new. Many of its variants were published in the internet and the difference between them is relatively small. Usually different versions use different transistors and diodes and some resistors and capacitors values vary but the circuit remains the same.
Phone transceiver digital modes interface bill of materials (BOM)
33 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2N2222 | TO-92_Molded_Wide_Oval | Q1, Q2 |
| 1 | Phone | PJ320E_3.5mm_Jack | J1 |
| 1 | Transceiver | PJ320E_3.5mm_Jack | J2 |
| 1 | TRX Data | Connector_Mini-DIN_Female_6Pin_2rows | P1 |
| 1 | 1200/9600 | Cliff_UT1x_SPDT_ON-ON_Switch_Short | SW1 |
| 2 | BAT46 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 3 | 4.7uF | CP_Radial_D5.0mm_P2.50mm | C1, C2, C4 |
| 2 | 100uF | CP_Radial_D5.0mm_P2.50mm | C3, C5 |
| 1 | 100n | C_Rect_L7.0mm_W2.0mm_P5.00mm | C6 |
| 2 | 10n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C7, C8 |
| 1 | 100pF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C9 |
| 1 | 1nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C10 |
| 2 | 33 | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R2 |
| 1 | 33K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 18K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 120K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 3.3K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 120 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R7 |
| 4 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R12, R13, R14 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10K | Potentiometer_Trimmer_Vertical_Multi_Compatible | R10, R11 |
| 1 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15 |
Phone transceiver digital modes interface design files
The KiCad project lives in the 4x1md/phone_rtty_interface repository on GitHub; these links point at the commit this page was built from.
Phone transceiver digital modes interface: common questions
How big is the Phone transceiver digital modes interface PCB?
The Phone transceiver digital modes interface measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Phone transceiver digital modes interface?
33 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Phone transceiver digital modes interface design files?
From the 4x1md/phone_rtty_interface repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Phone transceiver digital modes interface design in my own project?
Yes, under the terms of its MIT license, which 4x1md chose for the repository.
More boards in phone_rtty_interface
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372